Airtac ACE Compact Cylinder ACE32X75B
The AirTAC Airtac ACE Compact Cylinder ACE32X75B is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X75B
This AirTAC ACE32X75B is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and 75 mm stroke. Its hard-anodized aluminium body and S45C hard-chrome plated rod deliver 402.1 N push and 345.6 N pull at 0.5 MPa, making it a solid choice for light to medium automation tasks.
The short ISO 21287 body saves roughly 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding. For a real workload, plan on about 241 N (0.6 times the push force) as a safe working figure, which translates to lifting roughly 24.6 kg vertically with a 2:1 margin. The male rod thread (B code) simplifies direct coupling, and the fixed TPU bumper at both ends absorbs end-of-stroke impact.
Airtac ACE Compact Cylinder ACE32X75B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X75B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X75B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X75B Is Used
Fixture Clamping
Use this 32 mm bore cylinder to clamp small parts in a CNC vise or workholding fixture, where the 402.1 N push force holds components securely during drilling or milling.
Carton Tabbing
In a packaging line, this cylinder can push a tab or flap on a carton before sealing, with the 75 mm stroke covering the short travel needed and the compact body fitting under a conveyor guard.
Parts Ejection
Mount this cylinder to eject finished parts from a die-cast or injection mold, where the 345.6 N pull force retracts the rod quickly and the fixed bumper prevents damage at high cycle rates.
Is the Airtac ACE Compact Cylinder ACE32X75B the Right Cylinder?
When sizing, compare this 32 mm bore with the 25 mm bore (245.4 N push at 0.5 MPa) for lighter loads, or step up to the 40 mm bore (628.3 N push at 0.5 MPa) if you need more force. This model has no magnet (no S code), so it cannot use CMSE or DMSE sensors; order the -S variant if you need position sensing. The 1/8" port suits standard fittings, and the male rod thread allows direct attachment without a rod-end accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X75B FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
No, this model (ACE32X75B) does not include the optional -S magnet, so CMSE or DMSE switches cannot be mounted. If you need position sensing, order the -S version, which adds the built-in magnet. The cylinder has a fixed TPU bumper at both ends, not an adjustable cushion, and operates at speeds from 30 to 500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.