Airtac ACE Compact Cylinder ACE50X110SB
The AirTAC Airtac ACE Compact Cylinder ACE50X110SB is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X110SB
This AirTAC ACE50X110SB is a double acting compact cylinder that uses air to both extend and retract its 16 mm rod. It delivers a solid 981.7 N push force at 0.5 MPa, which translates to about 100 kgf of theoretical thrust, making it a strong choice for mid-size automation tasks. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames where a full-length cylinder would not.
Because this unit carries the optional -S magnet, you can mount CMSE or DMSE reed or solid-state switches directly on the body to confirm rod position. The fixed TPU bumper at each end absorbs impact energy, and the S45C hard-chrome plated rod resists wear in continuous cycling. For a real-world load, plan on about 60 kg of safe working force at 0.5 MPa, which gives you a comfortable margin for jigs, clamps, or light pressing operations.
Airtac ACE Compact Cylinder ACE50X110SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X110SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X110SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X110SB Is Used
Fixture Clamping
Use the ACE50X110SB to clamp a workpiece in a CNC milling fixture. The 981.7 N push at 0.5 MPa holds parts firmly, and the compact body fits under the spindle guard.
Product Stop Gate
Mount this cylinder on a conveyor line to raise a stop gate that sorts boxes. The 110 mm stroke lifts the gate clear, and the magnet lets a CMSE sensor confirm the gate is down.
Press Ram
In a small bench press, this cylinder provides a controlled 1374.4 N push at 0.7 MPa for pressing bushings into housings. The fixed TPU bumper reduces end-of-stroke shock on the frame.
Is the Airtac ACE Compact Cylinder ACE50X110SB the Right Cylinder?
For a lighter duty, consider the ACE40X110 with a 628.3 N push at 0.5 MPa, or step up to the ACE63X110 for 1558.6 N push if you need more muscle. The 110 mm stroke suits short transfer slides and clamping actions, and the male rod thread (B) simplifies mounting to a clevis or rod end. Since the magnet is fitted, you can add CMSE sensors for position feedback, and the 1/8" port matches common air line sizes for this bore class.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X110SB FAQ
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push increases to 1374.4 N and pull to 1233.7 N. The theoretical maximum force at 1.0 MPa is 200.2 kgf. These are calculated from the 50 mm bore and 16 mm rod.
The ACE50X110SB has a short body that saves about 50% of the mounting length compared to an ISO 15552 profile cylinder. This lets you install it in confined areas like inside a guard or between machine frames. The fixed TPU bumper absorbs end-of-stroke energy, and the optional -S magnet allows CMSE or DMSE switch mounting for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.