Airtac ACE Compact Cylinder ACE50X80S
The AirTAC Airtac ACE Compact Cylinder ACE50X80S is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X80S
This AirTAC ACE50X80S is a double acting compact cylinder built to ISO 21287, with a hard-anodized aluminium body and a hard-chrome plated S45C steel rod. At 0.5 MPa it delivers 981.7 N of push force and 881.2 N of pull, making it a solid mid-range actuator for automated assembly tasks.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine guarding and gantries. The optional -S magnet is fitted on this model, allowing CMSE or DMSE reed and solid-state switches to sense the piston position. For a real-world load, plan on about 60 kg of safe vertical lifting at 0.5 MPa, which is roughly 0.6 times the rated push force divided by gravity.
Airtac ACE Compact Cylinder ACE50X80S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X80S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X80S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X80S Is Used
Assembly Press
Use in a benchtop press for inserting bushings into aluminum housings, where the 981.7 N push at 0.5 MPa provides enough force for light interference fits.
Sorting Gate
Actuate a diverter gate on a packaging conveyor to route cartons between lanes, with the 80 mm stroke moving the flap quickly and the magnet enabling position feedback.
Fixture Clamp
Mount on a CNC fixture to clamp a workpiece during drilling, using the compact body to fit under the spindle and the TPU bumper to absorb end-of-stroke shock.
Is the Airtac ACE Compact Cylinder ACE50X80S the Right Cylinder?
For a lighter duty, the 40 mm bore ACE40X80 offers 628.3 N push at 0.5 MPa, while stepping up to the 63 mm bore ACE63X80 gives 1558.6 N push for heavier fixtures. The 80 mm stroke suits short transfer slides and clamping mechanisms where space is limited.
This model includes the -S magnet, so order CMSE or DMSE sensors separately to monitor position. The 1/8" port matches common air prep units, and the female M10x1.5 rod thread connects to standard clevis or rod end accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X80S FAQ
At 0.5 MPa, push is 981.7 N and pull is 881.2 N. At 0.7 MPa, push rises to 1374.4 N and pull to 1233.7 N. The theoretical maximum force at 1.0 MPa is 200.2 kgf. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The body is about 50% shorter than an ISO 15552 profile cylinder, so it saves space in tight jigs and guards. It uses a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet on this model allows CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.