Airtac ACED Double-acting Compact Cylinder ACED100X110SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X110SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X110SB
A double acting compact cylinder built to ISO 21287, the ACED100X110SB pushes a 100 mm bore through a 110 mm stroke with a rod leaving BOTH covers, so thrust is identical on each stroke: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and a fixed TPU bumper sits at each end.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in heavy presses, gantries and guarding where every millimetre of depth counts. The hard-anodized aluminium body carries a S45C hard-chrome plated rod, and this -S model includes the magnet so CMSE / DMSE switches can be clipped on for end-of-stroke detection. As a sizing guide, treat roughly 0.6 of the rated force as usable work: about 2262 N, which lifts around 230 kg vertically with margin.
Airtac ACED Double-acting Compact Cylinder ACED100X110SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X110SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X110SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X110SB Is Used
Bench-top press and crimping station
The symmetric 3769.9 N thrust at 0.5 MPa lets one ACED100X110SB crimp or stake from either rod end, halving cycle travel on a compact fixture bench.
Pallet strapping and clamp gantry
With about 230 kg of practical vertical capacity at 0.6 of rating, the 100 mm bore handles clamp arms on warehouse palletizing gantries where body length is limited.
Automated assembly with position feedback
The fitted -S magnet accepts CMSE / DMSE switches at both rod ends, giving end-of-stroke confirmation on automotive sub-assembly stations running 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X110SB the Right Cylinder?
At 100 mm bore this is a top-tier compact unit: 3769.9 N per direction at 0.5 MPa. Step down to the 80 mm bore (2356.2 N) for lighter press work, or up to 125 mm (5890.5 N) when the load demands more. The 110 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it ships as a catalogue item. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mounting brackets (FA/FB flange, LB foot, FTC) plus I/Y rod knuckles bolt straight to the ISO 21287 face, and the male rod thread (B code) suits external nuts and clevises.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X110SB FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal each way: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and the 1/4" PT port matches the 100 mm bore.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots; FA/FB flange, LB foot and FTC brackets plus I/Y knuckles bolt to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.