Airtac ACED Double-acting Compact Cylinder ACED100X200SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X200SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X200SB
A double acting, double-rod ISO 21287 compact cylinder, the ACED100X200SB pushes a 100 mm piston through a 200 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in either direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, both ways. The 20 mm through-rod resists rotation and modest side load, and the rear rod can carry a sensor flag or a second tool.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 200 mm stroke unit slots into presses, gantries and guarding where a full-length body will not fit. The hard-anodized aluminium barrel pairs with an S45C hard-chrome rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. At 0.5 MPa, plan on roughly 2260 N of usable work, which is about 230 kgf; with a 2:1 margin it lifts around 190 kg vertically. This S-code version carries the optional -S magnet, so CMSE / DMSE switches mount directly on the body slots.
Airtac ACED Double-acting Compact Cylinder ACED100X200SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X200SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X200SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X200SB Is Used
Pneumatic press and stamping station
The 3769.9 N both-ways output at 0.5 MPa suits a bench-top press that forms, marks or stakes aluminium brackets, with the 200 mm stroke clearing the part for manual loading.
Reciprocating conveyor pusher
Equal force in both directions makes the through-rod ideal for a pusher that indexes cartons on a packaging line and must retract under the same load, running 30-500 mm/s.
Lift-assist fixture in a weld cell
With about 190 kg of vertical lift at a 2:1 margin, the cylinder raises a welding fixture plate, while the rear rod carries a flag read by a CMSE switch for end-of-stroke confirmation.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X200SB the Right Cylinder?
At this bore size the 100 mm double rod delivers 3769.9 N at 0.5 MPa in both directions, so size the load against that figure rather than a larger single-rod push number. If your job needs less, the 80 mm bore gives 2356.2 N at 0.5 MPa; if you need more, the 125 mm bore reaches 5890.5 N. Stroke 200 mm sits inside the 300 mm maximum standard stroke for bore 100, so no made-to-order build is required. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. Male rod thread (B code) suits rod knuckles such as the I or Y fitting, and FA/FB flange or LB foot brackets bolt to the ISO 21287 face. CMSE / DMSE switches work because this model carries the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X200SB FAQ
Yes - the double-rod design puts a 20 mm rod through both covers, so both strokes use the rod-side area. Output is 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, identical push and pull, with a maximum of 768.8 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 200 mm stroke fits tight machines. A fixed TPU bumper at each end absorbs end-of-stroke energy but never holds or brakes a load - use a rod lock or pilot check for that. This S-code unit carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; models without the S code have no magnet. Mounting: FA/FB flange, LB foot, FTC, plus I and Y rod knuckles on the male rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X200SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.