Airtac ACED Double-acting Compact Cylinder ACED100X35S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X35S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X35S
A double acting compact cylinder with a rod leaving both covers, the ACED100X35S delivers 3769.9 N in either direction at 0.5 MPa because both strokes work on the rod-side area of its 100 mm bore. The through-rod resists rotation and side load, and the rear rod end can carry a sensor flag or a second tool. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly in the body slots.
The hard-anodized aluminium body with a roller-burnished bore pairs with an S45C hard-chrome-plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight press fixtures and gantries. At 0.7 MPa the same bore still gives 5277.9 N both ways, peaking at 768.8 kgf at 1.0 MPa. As a rule of thumb, plan on roughly 2262 N of usable work at 0.5 MPa, which lifts about 192 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X35S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X35S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X35S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X35S Is Used
Symmetric press fixture
The equal 3769.9 N output in both directions lets one cylinder clamp from the front rod and eject from the rear rod on a 35 mm stroke stamping jig.
Gantry lift-and-lower head
A through-rod on both covers balances the load and resists rotation when raising about 192 kg parts with a 2:1 margin on packaging line gantries.
Position-verified test station
With the fitted magnet, CMSE or DMSE switches confirm extend and retract of a 35 mm leak-test platen without external limit switches.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X35S the Right Cylinder?
For this 100 mm bore, 3769.9 N at 0.5 MPa both ways is the sizing anchor. If your load needs less than 1458.1 N, the 63 mm bore is the smaller step down; if you need more than 5890.5 N, move up to the 125 mm bore. Remember that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check for held loads. This model ships with the optional -S magnet already fitted for CMSE / DMSE switches, a female M12x1.75 rod thread on both ends, a 1/4" PT port, and FA/FB flange, LB foot or FTC mounting on the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X35S FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so output is equal both ways: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and jigs. This model carries the optional -S magnet, so CMSE / DMSE switches mount in the body slots for end-of-stroke signals. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FA/FB flange, LB foot or FTC brackets bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.