Airtac ACED Double-acting Compact Cylinder ACED125X35S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED125X35S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø125mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ125 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM16×2.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED125X35S
A double acting ISO 21287 compact cylinder with a through-rod: the ACED125X35S pushes a 25 mm rod out of BOTH covers, so thrust is identical on each stroke - 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa, equal in both directions because both sides work on the rod-side area. The 125 mm bore tops the ACED range at 1201.3 kgf maximum, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits presses and gantries that cannot accept a full-length body.
The hard-anodized aluminium body carries a hard-chrome plated S45C rod, with a fixed TPU bumper at each end to soften end-of-stroke impact. Because the -S magnet is fitted, CMSE or DMSE reed or solid-state switches can be clamped directly into the body slots for end-position feedback. As a working rule, plan on roughly 3534 N of usable push at 0.5 MPa (about 60% of rating), and for vertical work the rod lifts around 300 kg with a 2:1 margin. Speed range is 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED125X35S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED125X35S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø125mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED125X35S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 125 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED125X35S Is Used
Heavy fixture clamping on machining centers
The symmetric through-rod clamps a casting from both sides of a 4th-axis fixture with one cylinder, delivering 5890.5 N per jaw at 0.5 MPa inside a body short enough for the fixture plate.
Pallet lift-and-lower in a stamping cell
With about 300 kg of vertical lift capacity at a 2:1 margin, the double rod guides a die-cart elevator platen without a separate guide column, and the second rod end carries a position flag.
Bale or bin ejector on a packaging line
A short 35 mm stroke ejects filled cartons off a conveyor stop at up to 8246.7 N at 0.7 MPa, with the fitted magnet and a DMSE switch confirming home position each cycle.
Is the Airtac ACED Double-acting Compact Cylinder ACED125X35S the Right Cylinder?
At 5890.5 N per direction at 0.5 MPa, the 125 mm bore sits two steps above the 100 mm bore (3769.9 N) and well above the 80 mm bore (2356.2 N) - choose 125 mm when a heavy clamp or lift needs the extra margin in a short envelope. The 35 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Note that with air removed the piston drifts freely; if the load must stay put on pressure loss, add a rod lock or pilot check valve. Mounting brackets (FA/FB flange, LB foot, FTC) and I/Y rod knuckles bolt straight to the ISO 21287 face, and the female M16x2.0 rod thread on both ends accepts standard rod accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED125X35S FAQ
Yes - it is a double-rod cylinder, so a 25 mm rod exits both covers and every stroke uses the rod-side area. Output is 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa, identical push and pull, with a maximum of 1201.3 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port size follows the 125 mm bore.
The compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm force class fits where a full-length body will not, and FA/FB flange, LB foot and FTC brackets bolt to the standard ISO 21287 face. This ACED125X35S carries the optional -S magnet, so CMSE or DMSE switches mount in the body slots for end-of-stroke detection. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the female M16x2.0 thread on both rod ends accepts standard knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED125X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.