Airtac ACED Double-acting Compact Cylinder ACED32X110SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X110SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X110SB
A double acting compact cylinder built to ISO 21287, the ACED32X110SB pushes a 32 mm bore through a 110 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is a matched 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction - no push/pull imbalance to design around. The male rod thread (B code) and the fitted -S magnet for CMSE / DMSE switches come as ordered.
The through-rod resists rotation and light side load and gives a symmetric fixture mount, while the spare back-end rod can carry a sensor flag. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. As a rule of thumb, plan on roughly 207 N of real work at 0.5 MPa, which lifts about 17 kg vertically with a 2:1 margin. Fixed TPU bumpers absorb end-of-stroke shock at both covers.
Airtac ACED Double-acting Compact Cylinder ACED32X110SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X110SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X110SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X110SB Is Used
Symmetric jig clamping
The equal 345.6 N output at both rod ends lets a drilling fixture clamp a housing from two sides with one cylinder and identical grip force.
Center-guided pusher on packaging lines
A through-rod pusher centers cartons from both covers at 30-500 mm/s, keeping the 110 mm stroke inside a tight guard envelope.
Position-flagged elevator table
With the fitted magnet, CMSE or DMSE switches on the body report both end positions of a small lift table raising about 17 kg parts.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X110SB the Right Cylinder?
At 345.6 N per side at 0.5 MPa, this 32 mm bore suits clamping and transfer duties in the 20-30 kg class; step down to the 25 mm bore (206.2 N) for lighter jigs or up to the 40 mm bore (571.8 N) when the load grows. The 110 mm stroke sits inside the 200 mm standard range for this bore, so no made-to-order build is needed. Choose FA/FB flange or LB foot brackets on the ISO 21287 face, and remember a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X110SB FAQ
Yes - the double-rod design works on the rod-side area at each end, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port matches the 32 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow gantries and guards. This ACED32X110SB carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots; models ordered without the S code have no magnet. A fixed TPU bumper at each cover absorbs end-of-stroke shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.