Airtac ACED Double-acting Compact Cylinder ACED32X150
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X150 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X150
The ACED32X150 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format: a 32 mm bore and a 150 mm stroke in a housing that saves about 50% of the mounting length of an ISO 15552 profile cylinder. A piston rod exits both covers, so output force is equal in both directions - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on every stroke, because both sides work on the rod-side area. The through-rod resists rotation and side load, and the free back-end rod can carry a sensor flag or drive a second tool.
The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and fixed TPU bumpers at both ends absorb end-of-stroke energy. Run it on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um at 30-500 mm/s. For sizing, plan on roughly 207 N of real work at 0.5 MPa, which is about 21 kg of horizontal push; vertically the rod-side area equates to about 35 kg, so with a 2:1 margin it lifts about 17 kg. Note that it drifts if air is lost - add a rod lock or pilot check for held loads. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches.
Airtac ACED Double-acting Compact Cylinder ACED32X150 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X150 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X150
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X150 Is Used
Symmetric jig clamping
The through-rod lets a fixture clamp from both ends of the same piston, giving equal 345.6 N grip on a machined housing without a second cylinder.
Pusher on a packaging line
A 150 mm stroke at 30-500 mm/s moves cartons across a conveyor lane; the back-end rod carries a flag for the optional CMSE switch when -S is ordered.
Gantry lift-and-lower arm
With about 17 kg of vertical lift at a 2:1 margin, the double rod guides a small pallet elevator in a tight gantry where a full-length profile cylinder will not fit.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X150 the Right Cylinder?
At 345.6 N per direction, the 32 mm bore suits clamping and transfer work up to about 207 N of practical load at 0.5 MPa; step down to the 25 mm bore (206.2 N at 0.5 MPa) for lighter duty or up to the 40 mm bore (571.8 N) when you need more grip. The 150 mm stroke sits inside the 200 mm standard range for this bore, so it ships as a catalogue item. Choose the female M8x1.25 rod thread as coded here, or add B for a male thread; add -S only if you want CMSE / DMSE switch detection, since the magnet is an option, not standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X150 FAQ
Yes - the double-rod design puts a rod on each cover, so both strokes use the rod-side area. Output is 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight fixtures. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and does not hold a load, so use a rod lock or pilot check where position must be kept. FA/FB flange, LB foot and FTC mounts bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.