Airtac ACED Double-acting Compact Cylinder ACED32X175B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X175B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X175B
The ACED32X175B is a double acting, double-rod ISO 21287 compact cylinder from AirTAC: a 12 mm hard-chrome S45C rod exits both covers, so thrust is identical on every stroke - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction. The B code gives a male rod thread on both ends, and a fixed TPU bumper at each cover absorbs end-of-stroke shock. With a 32 mm bore and 175 mm stroke it sits inside the 200 mm standard range for this bore, so it ships as a catalogue item.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes this model a fit for tight sliding doors, synchronized tooling and guarded gantries. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag on a fixture. Running a 0.6 rule of thumb on the 345.6 N rating, plan for roughly 207 N of real work at 0.5 MPa - about 21 kg of vertical load. Speed range is 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED32X175B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X175B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X175B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X175B Is Used
Synchronized two-side press
The twin 12 mm rods push a forming mandrel from both ends of a small electronics press, giving 345.6 N from each face at 0.5 MPa so the tooling stays balanced through the 175 mm working stroke.
Bidirectional conveyor gate
Mounted alongside a packaging line belt, the male-threaded rods drive a diverting gate left or right with equal 483.8 N force at 0.7 MPa, and the rear rod doubles as a mount for a position flag.
Gantry Z-axis counterbalance arm
In a compact inspection gantry, the symmetric through-rod carries a camera bracket up and down over 175 mm with identical force both ways, fitting a head section about half the length of an ISO 15552 profile cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X175B the Right Cylinder?
At 345.6 N per direction this bore covers clamping and transfer duties up to roughly 35 kgf; step down to the 25 mm bore (206.2 N) for lighter pick-and-place, or up to the 40 mm bore (571.8 N) when the part weight grows. Both strokes use the rod-side area, so no direction is weaker. If the load must stay put when air is lost, pair the cylinder with a rod lock or pilot check - the through-rod itself does not hold position. Mount on the ISO 21287 face with FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles, and order PT ports as coded; add the -S option only if you need CMSE / DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X175B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal either way: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. For sizing, treat about 207 N (roughly 21 kg vertical) as the practical working load at 0.5 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome rod on both ends, 1/8" PT ports, male rod threads (B code), fixed TPU bumpers at both covers and a 30-500 mm/s speed range. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Switches are possible only if you order the optional -S magnet version, which accepts CMSE / DMSE sensors; this model without the S code has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.