Airtac ACED Double-acting Compact Cylinder ACED32X50S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X50S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X50S
A double acting, double-rod compact cylinder built to ISO 21287, the ACED32X50S pushes a 32 mm bore through a 50 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot go.
The hard-anodized aluminium body carries a hard-chrome plated S45C rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. With the -S magnet this model carries, CMSE or DMSE switches read position directly off the body slots. In practice, plan on roughly 207 N of usable work at 0.5 MPa, and the through-rod will lift about 17 kg vertically with a 2:1 margin. The rear rod also makes a handy sensor-flag mount, and the symmetric rod resists rotation and light side load.
Airtac ACED Double-acting Compact Cylinder ACED32X50S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X50S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X50S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X50S Is Used
Pick-and-place on compact CNC tending cells
The 50 mm stroke and 345.6 N bidirectional force suit a gripper arm sliding machined aluminium brackets in and out of a CNC vise, where the short ISO 21287 body fits inside the machine guard.
Pusher on a bottling-line transfer conveyor
Equal force both ways lets one ACED32X50S divert PET bottles onto an offshoot lane, with the fitted -S magnet driving a DMSE switch to confirm end-of-stroke before the next case fires.
Clamp-and-index fixture on an assembly press
With about 17 kg of vertical lift capability at a 2:1 margin, the through-rod holds a steel locating pin down on a bracket-welding fixture while the back rod carries a sensor flag for PLC verification.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X50S the Right Cylinder?
At 345.6 N per direction, the 32 mm bore sits between the 25 mm bore (206.2 N at 0.5 MPa) and the 40 mm bore (571.8 N at 0.5 MPa), so step up if your tooling needs more than about 200 N of working force. The 50 mm stroke is well inside the 200 mm standard range for this bore. Air supply is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and speed runs 30-500 mm/s. Remember the piston drifts if air is lost, so add a rod lock or pilot check for a held load. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face; the fitted -S magnet accepts CMSE / DMSE switches, and the female M8x1.25 rod thread with PT ports suits standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X50S FAQ
Yes. As a double-rod cylinder, a rod exits both covers and both strokes use the rod-side area, so force is equal either way: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Never size this bore by a larger push figure - there is no difference between push and pull.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot or FTC brackets bolt straight to its face. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches clip into the body slots for end-of-stroke or mid-stroke signals. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the piston will drift if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.