Airtac ACED Double-acting Compact Cylinder ACED40X110SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED40X110SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø40mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ40 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED40X110SB
A double acting compact cylinder built to ISO 21287, the ACED40X110SB has a piston rod leaving both covers, so thrust is identical on the out-stroke and the return: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa in either direction. The male rod thread (B code) and the fitted -S magnet make it ready for CMSE / DMSE switch sensing straight out of the box. Air supply is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and stroke speed runs 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and fixture plates. The through-rod resists rotation and light side load, and the rear rod can carry a sensor flag. A hard-anodized aluminium body with an S45C hard-chrome plated rod and a fixed TPU bumper at each end keeps it serviceable. As a rule of thumb, plan on roughly 343 N (about 35 kgf) of real work at 0.5 MPa, or lift around 29 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED40X110SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED40X110SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 572 N |
| 0.7 MPa | 800 N |
| Max (@1.0 MPa) | 117 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED40X110SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED40X110SB Is Used
Symmetric fixture clamping
The equal 571.8 N push and pull lets one ACED40X110SB both seat and retract a machined aluminium housing in a CNC drilling jig without a return spring or counter-cylinder.
Packaging line pusher with position feedback
With the -S magnet already fitted, CMSE or DMSE switches confirm end positions as the through-rod shunts cartons between conveyor lanes at up to 500 mm/s.
Two-sided lift column
A gantry that raises a 25-29 kg nesting plate vertically uses the rear rod as a balanced counter-mount, halving overhang and keeping the 110 mm stroke inside a short frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED40X110SB the Right Cylinder?
At 571.8 N per direction, the 40 mm bore sits between the 32 mm (345.6 N at 0.5 MPa) and the 50 mm (881.2 N at 0.5 MPa) - step up only if your tooling mass demands it. The 110 mm stroke is well inside the 200 mm standard limit for this bore, so no made-to-order build is needed. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED40X110SB FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal either way: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa, with a peak of 116.6 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 1/8" port suits this 40 mm bore.
The ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a hard-anodized aluminium barrel and S45C hard-chrome rod. A fixed TPU bumper at each cover decelerates the piston at the ends of travel; it is not adjustable and never holds a load - use a rod lock or pilot check for that. The -S magnet on this model accepts CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED40X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.