Airtac ACED Double-acting Compact Cylinder ACED63X200B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X200B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X200B
The ACED63X200B is a double acting, double-rod compact cylinder built to ISO 21287: a 63 mm bore with a 200 mm stroke and a 16 mm rod leaving both covers, so thrust is identical on the extend and retract stroke. At 0.5 MPa it delivers 1458.1 N in either direction, and 2041.3 N at 0.7 MPa. The male rod thread from the B code bolts straight to your tooling.
The hard-anodized aluminium body with an S45C hard-chrome rod keeps the short ISO 21287 footprint, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder - useful in tight gantries and fixture plates. Because the through-rod resists rotation and side load, the rear rod can also carry a sensor flag. As a rule of thumb, plan on about 875 N of usable work at 0.5 MPa, which lifts roughly 74 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches.
Airtac ACED Double-acting Compact Cylinder ACED63X200B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X200B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X200B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X200B Is Used
Reciprocating conveyor pushers
The equal 1458.1 N thrust both ways suits bidirectional diverters on bottling lines, where the 200 mm stroke crosses a full lane and the rear rod carries a position flag.
Fixture clamping on machining centres
About 875 N of usable clamping force at 0.5 MPa holds aluminium housings against a jig, and the male rod thread mounts a custom clamp arm directly.
Vertical lift-and-lower stations
The through-rod resists rotation when raising pallet-sized trays of roughly 74 kg with a 2:1 margin, and the symmetric rod gives a balanced top and bottom attachment.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X200B the Right Cylinder?
At 1458.1 N per direction at 0.5 MPa, this 63 mm unit sits between the 50 mm bore (881.2 N) and the 80 mm bore (2356.2 N) - step down for lighter clamping, up for heavy press-fit work. The 200 mm stroke is within the 250 mm standard limit for this bore, so no made-to-order build is needed. Note that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. Mount with FA/FB flange, LB foot or FTC brackets, and order the -S code only if CMSE / DMSE sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X200B FAQ
Yes. As a double-rod cylinder both strokes use the rod-side area, so force is equal extending and retracting: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the air must be filtered to 40 um.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome-plated 16 mm rod exiting both covers, and a fixed TPU bumper at each end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code; this model (no S) has no magnet, so order ACED63X200SB to run CMSE / DMSE switches. It runs -20 to +70 C with a 1/8" PT port and male rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X200B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.