Airtac ACED Double-acting Compact Cylinder ACED63X225S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X225S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 225mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X225S
A double acting, double-rod ISO 21287 compact cylinder, the ACED63X225S pushes a 63 mm piston through a 225 mm stroke with a rod leaving both covers, so thrust is identical in each direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, with a fixed TPU bumper at each end.
The hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into tight gantries and guarding where a full-length body will not fit. This -S version carries the optional magnet, so CMSE or DMSE reed or solid-state switches can be clipped onto the body slots for end-position feedback. As a planning figure, keep real work near 875 N at 0.5 MPa, and expect it to lift roughly 74 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED63X225S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X225S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X225S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X225S Is Used
Fixture clamping on CNC pallet changers
Equal 1458.1 N force in both directions lets one cylinder clamp and unclamp a pallet through the full 225 mm stroke without reversing the port logic.
Vertical part lowering in automotive weld cells
The through-rod keeps the tool plate from rotating during a controlled 225 mm drop of roughly 74 kg parts at 0.5 MPa.
Pusher arms on packaging line transfer decks
A 63 mm double-rod body ejects cartons at up to 500 mm/s while the rear rod drives a position flag read by a DMSE switch.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X225S the Right Cylinder?
At 1458.1 N per direction, bore 63 suits clamping, press-fit and transfer duties that bore 50 (881.2 N at 0.5 MPa) cannot close, while staying lighter than bore 80 (2356.2 N). The 225 mm stroke sits inside the 250 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. Mount with FA/FB flanges, LB feet or FTC brackets on the ISO 21287 face, and pair I or Y knuckles with the M10x1.5 female rod thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X225S FAQ
Because a rod exits both covers, both strokes use the rod-side area, so force is equal both ways: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and up to 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in guards and gantries. The S in ACED63X225S means the optional magnet is fitted, so CMSE or DMSE switches mount in the body slots; models ordered without -S carry no magnet. A fixed TPU bumper at each end absorbs end-of-stroke shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.