Airtac ACED Double-acting Compact Cylinder ACED80X30SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X30SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke30 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X30SB
A double acting ISO 21287 compact cylinder with a rod leaving both covers, the ACED80X30SB delivers 2356.2 N at 0.5 MPa in each direction, because both strokes work on the rod-side area. The 80 mm bore pushes 3298.7 N at 0.7 MPa either way, so clamping and pressing forces stay identical on the extend and return stroke. The male rod thread (B code) bolts straight into your knuckle or fixture.
The hard-anodized aluminium body with an S45C hard-chrome-plated 20 mm rod runs 30-500 mm/s on air filtered to 40 um, at 0.15-1.0 MPa (22-145 psi). Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters inside presses and weld fixtures. As a rule of thumb, plan on roughly 1414 N of usable work at 0.5 MPa, enough to lift about 72 kg vertically with a 2:1 margin. The through-rod also resists rotation and side load, and the free back-end rod can carry a sensor flag.
Airtac ACED Double-acting Compact Cylinder ACED80X30SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X30SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X30SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X30SB Is Used
Weld fixture clamping
The symmetric 2356.2 N hold in both directions clamps a steel bracket from either side of a robotic weld cell, and the 30 mm stroke clears part loading quickly.
Short-stroke press station
At 0.7 MPa the 3298.7 N through-rod presses bearings into housings on an assembly line, with the fixed TPU bumper absorbing the return impact at both ends.
Position-flagged transfer slide
With the -S magnet already fitted, CMSE switches confirm extend and retract on a gantry slide, while the rear rod drives a duplicate flag for the PLC.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X30SB the Right Cylinder?
Size between neighbors: a 63 mm bore gives 1458.1 N at 0.5 MPa, while a 100 mm bore reaches 3769.9 N, so pick the 80 mm when your clamp or press needs the 2356.2 N class at 30 mm stroke. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. This unit ships with the -S magnet fitted, so CMSE / DMSE switches mount directly on the body slots, and FA/FB flanges, LB feet or FTC brackets bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X30SB FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa on the rod-side area, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port depends only on the 80 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and fixtures. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches slide into the body slots for end-of-stroke detection. FA/FB flanges, LB feet and FTC brackets mount on the standard face, and a fixed TPU bumper at each end absorbs stroke-end energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.