Airtac ACED Double-acting Compact Cylinder ACED80X5
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X5 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X5
A double acting compact cylinder built to ISO 21287, the ACED80X5 pushes a 20 mm rod out of BOTH covers, so its 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) on every stroke - no push/pull imbalance to design around. The 5 mm stroke suits short clamp-and-confirm moves where a full-length body would never fit; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod stub can carry a sensor flag on automated tooling. A fixed TPU bumper at each end absorbs end-of-stroke shock. For sizing: at 0.5 MPa plan on roughly 1410 N (about 144 kg) of usable vertical effort with a 2:1 margin, so it will lift about 72 kg with headroom. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um.
Airtac ACED Double-acting Compact Cylinder ACED80X5 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X5 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X5
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X5 Is Used
Press-head confirmation on stamping fixtures
The 5 mm stroke is ideal for a short in-die clamp that seats a part and confirms presence; 2356.2 N at 0.5 MPa both ways handles heavy sheet-steel workpieces, and the through-rod keeps the tooling plate from rotating.
Gate pinning on machine guards
A short-body pin that slides a guard interlock only a few millimetres - the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits inside narrow guard channels.
Index stop on rotary assembly tables
The rear rod stub carries a sensor flag for cycle timing while the front rod drives a 5 mm indexing stop; equal force in both directions means retraction is as positive as engagement on a 480.5 kgf-class bore.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X5 the Right Cylinder?
At 80 mm bore this sits in the heavy compact class: 2356.2 N at 0.5 MPa both ways, well above the 50 mm bore (881.2 N) and below the 100 mm bore (3769.9 N) if you need more. The 5 mm stroke is well inside the 300 mm max standard stroke for this bore. Ports are 1/4" (PT thread), the female rod thread is M12x1.75. FA/FB flanges, LB feet and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face. Note that a plain double-rod cylinder drifts when air is lost - for a held load add a rod lock or pilot check. If you need position sensing, order the -S variant: without the -S code there is no magnet and no CMSE/DMSE switching.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X5 FAQ
Yes - it is a double-rod cylinder, so a rod exits both covers and both strokes use the rod-side area. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in both directions, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome-plated 20 mm rod, threaded aluminium covers and a fixed TPU bumper at each end. Switches are not possible on this unit as ordered because no magnet is fitted; the optional -S code adds the magnet so CMSE or DMSE switches can be used. Mounting is via FA/FB flanges, LB feet or FTC brackets on the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.