Airtac ACED Double-acting Compact Cylinder ACED80X90SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X90SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X90SB
A double acting ISO 21287 compact cylinder with a rod exiting BOTH covers, the ACED80X90SB delivers 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in each direction, because both strokes work on the rod-side area. The 80 mm bore with a 90 mm stroke and male rod thread suits heavy clamping and press-fit stations where the same force is needed on the return stroke. Air supply is 0.15-1.0 MPa (22-145 psi), speed runs 30-500 mm/s, and the S code means the magnet is already fitted for CMSE / DMSE switches.
The hard-anodized aluminium body and S45C hard-chrome plated 20 mm rod stand up to daily industrial duty, with a fixed TPU bumper at each end to soften the stroke ends. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press frames and gantries. As a through-rod, the back-end rod resists rotation and can carry a sensor flag. For sizing: at 0.5 MPa the usable work force is roughly 1414 N, which lifts about 72 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X90SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X90SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X90SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X90SB Is Used
Press frame clamping
The 2356.2 N symmetric force holds sheet-metal blanks in a stamping die from both sides, and the 90 mm stroke clears part loading in a tight press body.
Gantry lift-and-lower
With about 72 kg of vertical lift at a 2:1 margin, the through-rod raises and lowers fixture plates on an assembly gantry with equal force up and down.
Pusher with position sensing
On a packaging line conveyor, the fitted magnet drives CMSE switches to confirm extend and retract of carton pushers running at 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X90SB the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, this 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) double-rod options - step down for lighter tooling, up for deep-draw or heavy press work. The 90 mm stroke is well inside the 300 mm standard range for bore 80, so no made-to-order stroke is needed. Remember the piston drifts if air is lost; add a rod lock or pilot check valve where a load must stay held. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight to the ISO 21287 face, and PT ports take standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X90SB FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa on every stroke, with a peak of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and temperature -20 to +70 C. The 1/4" port matches the 80 mm bore, and the 90 mm stroke is within the 300 mm standard limit.
The S in ACED80X90SB means the optional -S magnet is fitted, so CMSE reed or DMSE solid-state switches can be clamped anywhere along the magnet slots in the body to signal end positions. Models ordered without the S code carry no magnet and cannot drive these switches. The fixed TPU bumper at each end only decelerates the piston near the stroke ends and never holds or brakes a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X90SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.