Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke90 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB
The AirTAC ACQJ80X90-30SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the EXTEND end position. You can fine-tune the usable extend range from 60 mm up to the full 90 mm directly on your machinery without swapping parts. The RETRACT stroke remains completely unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of this bore.
This 80 mm bore model features a Ø25 mm piston rod and PT3/8 port. It includes the -S magnet for positioning via reed or solid-state switches, and the -B male rod-end thread (M22x1.5) for direct load coupling. The R adjuster thread is M20x1.5. Deceleration relies on a fixed NBR elastomer bumper at each end, not an adjustable air cushion.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 90 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB Is Used
Machining Center Clamps
Dial in the exact 60-90 mm extend position for varying part fixtures on a CNC lathe without machining new stop blocks.
Packaging Line Diverters
Adjust the extend stroke on-the-fly during product changeovers to push different carton widths onto secondary lanes.
Assembly Press Stops
Set trial end positions for pressing bearings, allowing operators to tweak the depth safely before final commitment.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB the Right Cylinder?
Stepping down to a 63 mm bore drops the 0.5 MPa push force to 1558.6 N, whereas moving up to a 100 mm bore raises it to 3927.0 N. This 80 mm unit delivers 2513.2 N push at 0.5 MPa, striking a balance for medium-heavy tasks. If your end position never varies, a fixed-stroke ACQ cylinder is sufficient. When ordering, verify the 90 mm full stroke, the 30 mm adjuster window, the S magnet, and the B male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB FAQ
The usable extend range is 60-90 mm (full 90 mm stroke minus up to 30 mm). Force is identical to a standard ACQ: push is 2513.2 N and pull is 2267.8 N at 0.5 MPa, push is 3518.5 N at 0.7 MPa, and max push is 513 kgf at 1.0 MPa.
An M20x1.5 threaded stop with a lock nut limits the extend distance without changing the piston area, so force remains constant. Retract is unaffected. The cylinder uses a fixed NBR elastomer bumper for end-of-stroke deceleration, and the -S magnet works with reed or solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X90-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.