Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB
The AirTAC Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB is a genuine single acting, push (spring return) ISO 21287 compact air cylinder with a Ø25mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeSingle acting, push (spring return)
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB
This AirTAC ASE25X15SB is a single acting push cylinder with spring return, delivering a net 210.1 N push at 0.5 MPa and 308.3 N at 0.7 MPa. Its ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, fitting into tight machine guards and jigs where space is limited.
The hard-anodized aluminium body and S45C hard-chrome rod resist wear in repetitive cycles. The optional -S magnet is fitted here, so CMSE or DMSE switches can be mounted for position sensing. For a safe working load, plan for about 126 N of real work at 0.5 MPa, which lifts roughly 13 kg vertically with a 2:1 margin, matching a typical small part weight.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB Technical Specifications
| Model | Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB |
|---|---|
| Series | ASE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Single acting, push (spring return) |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force (spring return) |
|---|---|
| 0.5 MPa | 210.1 N |
| 0.7 MPa | 308.3 N |
Single-acting push: air extends the rod; the return spring retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa. Single-acting strokes are short (Ø12 to 10 mm, Ø16-100 to 25 mm).
Model Code: Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB
| ASE | ISO 21287 compact cylinder (single-acting push, spring-return). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB Is Used
Jig Clamping
Mount on a fixture to clamp small plastic parts during drilling. The 210.1 N push holds parts firmly, and the spring retracts the rod for quick part removal.
Sorting Gate
Use in a conveyor sorting station to divert lightweight cartons. The 15 mm stroke and 50-500 mm/s speed keep cycle times short, while the compact body fits under the conveyor frame.
Guard Interlock
Actuate a safety interlock pin on a machine guard. The spring return ensures the pin retracts when air is removed, and the TPU bumper absorbs end-of-stroke impact for quiet operation.
Is the Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB the Right Cylinder?
For lighter duty, the ASE20X15 offers 127.4 N at 0.5 MPa, while the ASE32X15 steps up to 352.5 N. This 25 mm bore with a 15 mm stroke suits short, fast indexing tasks. The spring returns the rod to home on air loss, but it does not hold a mid-stroke position, so use it for push-and-release actions. The male rod thread (B) simplifies direct coupling, and the M5x0.8 port works with standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Single-acting: do not force the rod against the spring.
- check Installation by qualified personnel per AirTAC docs.
Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB FAQ
The push force is 210.1 N at 0.5 MPa and 308.3 N at 0.7 MPa, both net of the return spring. Minimum working pressure is 0.2 MPa, and proof pressure is 1.5 MPa (215 psi).
The body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in confined areas like machine guards or gantries. The fixed TPU bumper at both ends reduces noise, and the optional -S magnet allows CMSE or DMSE switch mounting for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ASE Single Acting Plunger Type Compact Air Cylinder ASE25X15SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.