Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S
The AirTAC Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø0mm bore and 100mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ0 mm
- Stroke100 mm
- Port sizePT/G
- Acting typeDouble acting, adjustable stroke
- Rod thread
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S
Fifty millimetres of on-site stroke adjustment gives the MAJ25X100-50S unusual flexibility for a 25 mm bore: turn the external stop screw and the extend stroke lands anywhere within the 50 mm window, while the full 100 mm travel stays available. At 0.5 MPa expect 245.3 N on extend and 206.1 N on retract.
Construction is the classic MA recipe - a stainless-steel barrel rolled onto aluminium-alloy covers with a stainless-steel block, sealed by a two-way piston seal that also stores grease, and a 20 um hard-chrome plating on the carbon-steel rod to resist scoring. If your fixture only needs about 147 N of real force at 0.5 MPa - 60 percent of the rated push - this cylinder still carries margin for pressure dips.
Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S Technical Specifications
| Model | Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 100 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 0 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S Is Used
Clutch-plate test rig
A QC bench cycles clutch packs at 343.4 N (0.7 MPa), and the 50 mm window lets the operator set ram dwell depth per part number.
Bagging chute gate
A gate under a snack-food weigher drops batches; the stainless round body shrugs off flour-dust wipe-downs, and LB feet bolt it straight to the frame.
Tray divider actuator
Sorting trays of different widths on a conveyor, one cylinder covers all via the 50 mm stop range, with a Y knuckle for the pivoting pusher arm.
Is the Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S the Right Cylinder?
Compare both directions before ordering: push at 0.5 MPa is 245.3 N and pull is 206.1 N, so retraction-heavy jobs may prefer the 32 mm bore (402.2 N / 345.6 N); the 20 mm alternative delivers 157.0 N / 131.9 N. Because the adjuster shortens the extend stroke but cannot lengthen it past the ordered 100 mm, order the full stroke you might ever need - it is well under the 300 mm standard limit for this bore. FA flange and LB foot mount; I and Y knuckles suit pivoting loads. The stop sets extend position only - it is not a brake, and drift is possible on pressure loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S FAQ
At 0.5 MPa: 245.3 N extend, 206.1 N retract. At 0.7 MPa: 343.4 N extend, 288.5 N retract. Theoretical maximum force is 50 kgf at 1.0 MPa. Air supply is 0.15-1.0 MPa (22-145 psi), ports are 1/8" on the 25 mm bore.
The riveted stainless barrel and 20 um hard-chrome plated carbon-steel rod resist corrosion in damp, food-adjacent or outdoor spots where painted mini cylinders blister, while aluminium-alloy covers keep the body compact for tight machine layouts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAJ Special Purpose Cylinder B01-MAJ25X100-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.