Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB is a genuine double-acting COMPACT (thin) air cylinder with a Ø12mm bore and 5mm stroke, M5×0.8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ12 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB
The AirTAC B01-SDA12X5SB is a double-acting, single-rod compact cylinder. The B01- prefix marks this as an application-dedicated (customer-specified) variant of the base SDA12X5SB, meaning it is mechanically identical to the standard model but grouped for specific build requirements. Delivering 56.5 N of push force at 0.5 MPa, it handles short 5mm strokes with a 6mm piston rod.
This unit features a built-in magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. It includes the male-thread (-B) M5x0.8 rod end for secure load coupling. The riveted body design minimizes axial footprint, while fixed NBR bumpers absorb end-stop energy.
Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø12 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | — |
| Max (@1.0 MPa) | 12 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB Is Used
Micro-Ejector Pins
Provides a 5mm rapid tap to eject small electronic components from PCB assembly fixtures without stressing the board.
Sensor Positioning
Shifts a small optical sensor precisely into the inspection window of a packaging line using its 56.5 N extend force.
Lab Dispenser Dosing
Acts as a compact actuator for micro-volume fluid dispensing, where the short 5mm stroke ensures accurate shot sizes.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB the Right Cylinder?
This 12mm bore provides 56.5 N push at 0.5 MPa, yielding a safe working load around 34 N (60% capacity) and a vertical lift capacity of roughly 2.9 kg with a 2:1 margin. If your application requires less force, there is no smaller SDA bore; stepping up to the SDA16 increases push to 100.5 N at 0.5 MPa. Confirm your ordering essentials: 12mm bore, 5mm stroke, M5x0.8 port, built-in magnet, and male M5x0.8 rod thread. Because the fixed bumper only decelerates the piston near stroke end, an external rod lock or pilot-operated check valve is required to hold a load safely without live air pressure.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB FAQ
At 0.5 MPa, the push force is 56.5 N and the pull force is 42.4 N. At 0.7 MPa, push is 79.2 N and pull is 59.4 N. The theoretical maximum push is 12 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed of 30-500 mm/s.
The B01- prefix denotes an application-dedicated (customer-specified) variant of the SDA12X5SB; mechanically, it shares the exact same physical specs. It uses fixed NBR bumpers at each end to decelerate the stroke, which are not adjustable air cushions. For high-speed cycling, add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA12X5SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.