Airtac B01-SDA Dedicated Cylinder B01-SDA32X30
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 30mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke30 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30
The AirTAC B01-SDA32X30 is a double-acting single-rod compact cylinder. The B01- prefix designates this as an application-dedicated (customer-specified) variant of the standard SDA32X30, meaning it is mechanically identical to the base model while grouped for specific industry builds. It generates 402.1 N of push force and 345.6 N of pull force at 0.5 MPa.
Designed to save axial mounting depth, its short riveted body fits where round-body or profile cylinders cannot. The bore is hard-anodized, and deceleration relies on a fixed NBR bumper at each end rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot directly mount AirTAC position switches without upgrading to the -S option.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X30
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 Is Used
CNC Fixture Clamping
Secures aluminum housings inside CNC machining centers, utilizing the 30mm stroke to quickly lock parts against locators for high-speed milling.
Carton Flap Folding
Deploys at 30mm to push corrugated cardboard flaps into position on automated packaging lines prior to tape sealing.
Package Diverting
Extends a 32mm bore rod to push parcels from a main conveyor belt onto a sorting spur, handling loads safely within its 241 N working capacity.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 the Right Cylinder?
When sizing this 32mm bore, stepping down to the SDA25 yields 245.4 N of push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. For the B01-SDA32X30, a safe working load is approximately 241 N (about 60% of the 402.1 N figure), translating to a vertical lift capacity of roughly 20.5 kg with a 2:1 safety margin. Confirm your ordering essentials: 32mm bore, 30mm stroke, PT1/8 port, female M6x1.0 rod thread, and no magnet. Note that this cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; use an external rod lock or pilot-operated check valve if position holding is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X30 FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed of 30-500 mm/s.
The B01- prefix indicates an application-dedicated (customer-specified) variant of the SDA32X30, sharing the exact same physical specifications. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. For high-speed or high-energy cycles, add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.