Airtac B01-SDA Dedicated Cylinder B01-SDA32X50
The AirTAC Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 is a genuine double-acting COMPACT (thin) air cylinder with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
- BoreØ32 mm
- Stroke50 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B01-SDA Dedicated Cylinder B01-SDA32X50
The AirTAC B01-SDA32X50 is a double-acting, single-rod compact cylinder. The leading "B01-" prefix marks this as an application-dedicated, customer-specified variant of the standard SDA32X50, meaning it is mechanically identical to the base model. It delivers a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. The 32 mm bore utilizes a hard-anodized inner wall and a two-way piston seal to ensure reliable operation across its 50 mm stroke.
This unit features a short riveted body that significantly reduces axial mounting depth compared to round-body alternatives, making it highly effective for tight machine footprints. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Operating speeds range from 30-500 mm/s, and the PT1/8 port ensures efficient airflow for this specific bore size.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 Technical Specifications
| Model | Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-SDA Dedicated Cylinder B01-SDA32X50
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 Is Used
PCB Depaneling Router
Provides the 402.1 N extension force needed to actuate the tooling gate on an automated PCB depaneling router, fitting neatly within the tight axial footprint of the electronics assembly cell.
Carton Flap Folder
Drives the side flap folding mechanism on a continuous motion cartoner, utilizing its 50 mm stroke and fixed NBR bumpers to absorb the repetitive end-stop impact without external cushions.
Stamping Press Feed
Actuates the gripper jaw on a servo roll feed system for a small mechanical stamping press, moving coil stock accurately at cycle rates within the 30-500 mm/s speed range.
Is the Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 the Right Cylinder?
When sizing this actuator, evaluate your force margins both ways: stepping down to the SDA25 yields 245.4 N of push at 0.5 MPa, while stepping up to the SDA40 provides 628.3 N. Based on the 402.1 N push figure, the safe working load is approximately 241 N (about 60% capacity), which translates to a vertical lift capability of roughly 20.5 kg with a 2:1 safety margin. To order, confirm the 32 mm bore, 50 mm stroke, PT1/8 port, female M6x1.0 rod thread, and note that this specific SKU lacks a piston magnet. If your application must hold a load without live pressure, be aware that a plain cylinder drifts when air is lost; an external rod lock or pilot-operated check valve is required for secure positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short-body depth vs. a round-body cylinder
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
- ✓ Side load — avoid on a compact rod
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the short piston rod.
- check Very long strokes are unsuitable for the compact body.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-SDA Dedicated Cylinder B01-SDA32X50 FAQ
This 32 mm bore double-acting cylinder generates a push force of 402.1 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push force is 563 N and the pull force is 483.8 N. The theoretical maximum push force is 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and functions in temperatures from -20 to +70 C.
The B01- prefix simply designates this as an AirTAC application-dedicated, customer-specified build of the standard SDA32X50; it shares the exact same physical specifications, seals, and dimensions as the base model. Regarding load holding, a plain SDA cylinder does not lock position upon air loss or valve centering—the piston will drift. The fixed NBR bumper only decelerates the stroke end and acts as neither a lock nor a brake. For load holding, an external rod lock or pilot-operated check valve is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-SDA Dedicated Cylinder B01-SDA32X50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.