Airtac GAC F.R.L. Unit GAC20008ALNW
The AirTAC Airtac GAC F.R.L. Unit GAC20008ALNW is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialPC
- Drainautomatic
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC20008ALNW
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC GAC20008ALNW combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in port serves the 750 g body, while the 5 um element captures fine particles for sensitive downstream valves. Because the lower-pressure type tops out at 0.15-0.4 MPa (20-58 psi), it targets low-force actuators rather than general plant air.
The automatic drain clears condensate from the 25 cc bowl without an operator, which is decisive for unattended single-cylinder jigs. No gauge is supplied, but the body features a 1/8in gauge connection if you need to add one to read the set pressure. The 36 cc oil bowl feeds an ISO VG 32 mist downstream of the regulator seat, keeping the internal mechanism clean.
Airtac GAC F.R.L. Unit GAC20008ALNW Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC20008ALNW |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC20008ALNW
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-08 filter, GAR200-08 regulator, GAL200-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/4" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC20008ALNW Is Used
Low-Force Assembly Jigs
Feeds delicate pneumatic grippers on electronics assembly jigs where a 0.4 MPa ceiling prevents actuator damage.
Lab Analytical Tools
Conditions air for small lab-scale spinting tools requiring 5 um particulate capture and steady low pressure.
Single-Actuator Stations
Supplies isolated low-force clamping cylinders with automatic condensate drainage for unattended weekend runs.
Is the Airtac GAC F.R.L. Unit GAC20008ALNW the Right Air-Prep Unit?
Choose this 1/4in unit when a low-pressure circuit demands fine 5 um filtration and unattended condensate removal. If the machine ever needs more than 0.4 MPa, the L type is the wrong part, so select a standard S type instead. Because no gauge is included, you must add one to the 1/8in port to verify settings. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator. Should the element clog or bowl crack, order the GAF200-08, GAR200-08 and GAL200-08 spares. Stepping up to the GAC300 doubles the flow envelope to 3000 L/min at 0.7 MPa inlet, but note that the 0.4 MPa L-type ceiling is 44% of the standard 0.9 MPa maximum.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC20008ALNW FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a max pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. It operates from -5 to 70 C, weighs 750 g, and uses a 25 cc drain bowl with a 36 cc oil bowl. The recommended lubricant is ISO VG 32.
The N in the code means no gauge is supplied, so the set pressure cannot be read without adding one. The body features a 1/8in gauge connection for installing a PT-threaded gauge with an MPa/psi scale later.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC20008ALNW
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.