Airtac GAC F.R.L. Unit GAC200C06ALK
The AirTAC Airtac GAC F.R.L. Unit GAC200C06ALK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialMetal
- Drainautomatic
- Pressure gaugeCircular, MPa / psi
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200C06ALK
Delivering cleaned, regulated and lubricated air for light-duty pneumatics, this AirTAC unit integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a lower-pressure type operating at 0.15-0.4 MPa (20-58 psi), while the 40 um element captures solid particles before they reach downstream valves.
The metal bowl equips this assembly with an automatic drain that evacuates condensate without operator input, and a circular gauge reading MPa/psi is fitted to monitor the set pressure. A reverse-flow valve is also fitted, which the catalogue depicts as a separate pneumatic symbol on its own page.
Airtac GAC F.R.L. Unit GAC200C06ALK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200C06ALK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Metal |
| Drain type | Automatic drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. The fitted circular gauge reads in MPa / psi, set by the PT thread code.
Model Code: Airtac GAC F.R.L. Unit GAC200C06ALK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| C | Bowl material: Metal. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| A | Drain: Automatic drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| (blank) | Circular pressure gauge fitted. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200C06ALK Is Used
Micro-Assembly Jigs
Feeds single-actuator pick-and-place probes requiring delicate, low-force clamping at or below 0.4 MPa.
Laboratory Air Tools
Prepares supply for benchtop test fixtures where a compact 1/8in port and automatic condensate removal save bench space.
Small Valve Banks
Conditions air for miniature solenoid valve manifolds, adding necessary oil mist while filtering out 40 um debris.
Is the Airtac GAC F.R.L. Unit GAC200C06ALK the Right Air-Prep Unit?
This 750 g assembly is sized for single actuators or small jigs, contrasting with the heavier 1300 g GAC300 that offers a larger 60 cc drain bowl. The lower-pressure type caps output at 0.4 MPa, making it the wrong choice if a machine might later require higher force. Because the lubricator introduces oil mist downstream of the regulator, select a standalone filter-regulator if the process demands an oil-free exhaust. Replacement spares share the 200-06 suffix: GAF200-06, GAR200-06 and GAL200-06. Stepping from this body to the GAC300 roughly increases the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, an envelope jump of about 1.7x.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200C06ALK FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) against a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, holds 25 cc of condensate and 36 cc of oil, and uses ISO VG 32 lubricant.
The K indicates a reverse-flow (reflux) valve is attached to the assembly. The official catalogue shows this as a separate pneumatic symbol with details hosted on its own page.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200C06ALK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.