Airtac GAC F.R.L. Unit GAC200N06LN
The AirTAC Airtac GAC F.R.L. Unit GAC200N06LN is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06LN
Delivering cleaned, regulated and lubricated air for small pneumatic duties, this AirTAC F.R.L. combination integrates a filter, regulator and lubricator on a single L-shape bracket. The 1/8in port pairs with a 40 um element and a lower pressure type operating at 0.15-0.4 MPa (20-58 psi). Because the three units are pre-plumbed in sequence, the filter catches moisture before the regulator sets the pressure, and the lubricator introduces oil mist downstream of the regulator seat.
The nylon bowl equips this 750 g assembly, which relies on a semi-auto and manual drain pair to clear its 25 cc condensate sump. No gauge is supplied, but a 1/8in gauge connection allows adding one to verify the downstream setting. For maintenance, the individual GAF200-06, GAR200-06 and GAL200-06 modules are all separately orderable.
Airtac GAC F.R.L. Unit GAC200N06LN Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06LN |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200N06LN
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06LN Is Used
Micro-Assembly Jigs
Feeds delicate pick-and-place actuators handling surface-mounted electronics where low, stable pressure is critical to avoid crushing tiny components.
Laboratory Air Tools
Conditions air for low-force laboratory syringes or small blow-off nozzles requiring a regulated 0.4 MPa supply with added lubrication for moving parts.
Small Fixture Cylinders
Supplies single-acting clamping cylinders on benchtop machining fixtures, ensuring consistent force through the integrated regulator and lubricator.
Is the Airtac GAC F.R.L. Unit GAC200N06LN the Right Air-Prep Unit?
Choose this compact 1/8in body for single actuators or jigs where the supply must stay below 0.4 MPa, keeping in mind the 25 cc drain bowl and 36 cc oil sump require frequent attention compared to larger frames. The semi-auto drain dumps condensate on every pressure drop, while the manual option suits scheduled checks. Since no gauge is included, operators must fit one to the 1/8in port to read the exact setpoint. If the downstream line must remain completely oil-free, omit the lubricator and choose a dedicated filter-regulator instead. When sizing your supply, remember that the lower-pressure ceiling of 0.4 MPa is 44% of the standard 0.9 MPa maximum.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06LN FAQ
This lower-pressure type operates at 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). The temperature range is -5 to 70 C, and the recommended lubricant is ISO VG 32. It weighs 750 g and features a 25 cc drain bowl alongside a 36 cc oil bowl.
No, the N in the code indicates no gauge is supplied. You can install your own gauge using the 1/8in gauge connection on the body to monitor the 0.15-0.4 MPa operating range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06LN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.