Airtac GAC F.R.L. Unit GAC200N06LNWK
The AirTAC Airtac GAC F.R.L. Unit GAC200N06LNWK is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/8" ports, a 5 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/8"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade5 µm
- Bowl materialNylon
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight750 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC200N06LNWK
Delivering cleaned, regulated and lubricated air for compact pneumatics, this AirTAC unit combines a filter, regulator and lubricator on a single L-shape bracket with quick mounting clamps. The 1/8in port and 750 g weight make it ideal for feeding a single small actuator or jig. Because the 5 um element sits upstream of the pressure setting, the regulator seat stays clear of debris while the lubricator introduces oil mist downstream.
Configured for low-pressure duties, the regulator operates from 0.15-0.4 MPa (20-58 psi). The nylon bowl holds 25 cc of condensate and 36 cc of oil. A reverse-flow (reflux) valve is fitted, which the catalogue shows as a separate pneumatic symbol on its own page. No gauge is supplied, but a 1/8in connection is available if you need to add one to monitor the set pressure.
Airtac GAC F.R.L. Unit GAC200N06LNWK Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC200N06LNWK |
|---|---|
| Series | GAC200 F.R.L. combination |
| Port size | 1/8" (PT thread) |
| Filtering grade | 5 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | Nylon |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 25 cc |
| Capacity of oil bowl | 36 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 750 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC200 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC200N06LNWK
| GAC200 | GA200 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| N | Bowl material: Nylon. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 06 | Port size 1/8". This body offers 06 = 1/8", 08 = 1/4". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| W | Filtering grade 5 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| K | Reverse-flow (reflux) valve attached. |
Constituent units, orderable separately as spares: GAF200-06 filter, GAR200-06 regulator, GAL200-06 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC200 · 1/8" · curve to 1750 L/min |
|---|---|
| One size up | GAC300 (curve to 3000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC200N06LNWK Is Used
Micro-Assembly Jigs
Feeds delicate pick-and-place actuators where a 1/8in port and 5 um filtration protect tiny precision valves from grit.
Laboratory Pneumatics
Suitable for benchtop test rigs requiring a stable 0.15-0.4 MPa output and a compact 750 g footprint.
Small Air Tools
Provides regulated, lubricated air to low-pressure miniature grinders or screwdrivers, extending tool life via downstream oil mist.
Is the Airtac GAC F.R.L. Unit GAC200N06LNWK the Right Air-Prep Unit?
Choose this assembly for low-pressure circuits requiring fine 5 um filtration, matching the PT thread and MPa/psi gauge scale to your existing fittings. The semi-auto and manual drain pair handles condensate for attended machines. If your downstream line must remain oil-free, omit the lubricator and select a separate filter-regulator instead. Should the element clog or a bowl crack, order the GAF200-06, GAR200-06 and GAL200-06 spares individually rather than replacing the whole assembly.
Stepping up to the GAC300 body raises the plotted flow envelope from 1750 to 3000 L/min at 0.7 MPa inlet, whereas this compact 750 g unit is built for minimal flow duties. The 0.4 MPa upper limit is 44% of the standard 0.9 MPa ceiling, so verify your machine will never need higher pressure before specifying this L type.
Quick checklist
- ✓ Body size for your peak flow (1/8" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 25 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 750 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC200N06LNWK FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi) with a maximum pressure of 1.0 MPa (145 psi) and a proof pressure of 1.5 MPa (215 psi). It operates from -5 to 70 C, weighs 750 g, and features a 25 cc drain bowl alongside a 36 cc oil bowl. The recommended lubricant is ISO VG 32 or equivalent.
The N in the code means no gauge is supplied, but you can fit one using the 1/8in gauge connection. The K indicates a reverse-flow (reflux) valve is fitted, which the catalogue draws as a separate pneumatic symbol with details on its own page.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC200N06LNWK
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.