Airtac GAC F.R.L. Unit GAC30008LN
The AirTAC Airtac GAC F.R.L. Unit GAC30008LN is a genuine three-unit F.R.L. combination — a filter, a pressure regulator and a lubricator pre-assembled on one bracket with quick mounting clamps. It has 1/4" ports, a 40 µm filter element and regulates 0.15 - 0.4 MPa (20 - 58 psi).
- TypeF.R.L. combination
- Port size1/4"
- Pressure range0.15 - 0.4 MPa (20 - 58 psi)
- Filtering grade40 µm
- Bowl materialPC
- Drainsemi-auto + manual
- Pressure gaugeNot fitted
- Weight1300 g
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac GAC F.R.L. Unit GAC30008LN
Delivering cleaned, regulated and lubricated air for low-pressure pneumatics, this AirTAC GAC30008LN combines a filter, regulator and lubricator on a single L-shape bracket. The 1/4in ported body operates in the 0.15-0.4 MPa (20-58 psi) range and uses a 40 um element. Air passes through the filter first, then the regulator, and finally the lubricator, ensuring oil mist is added downstream so the regulator seat never fouls.
Weighing 1300 g, this unit carries a 60 cc condensate bowl and a 98 cc oil reservoir. Because the N follows the port in the ordering code, no pressure gauge is supplied; the body features a 1/8in gauge connection if you need to add one later. The standard semi-auto and manual drain pair is fitted, dumping condensate on pressure drops or on demand.
Airtac GAC F.R.L. Unit GAC30008LN Technical Specifications
| Model | Airtac GAC F.R.L. Unit GAC30008LN |
|---|---|
| Series | GAC300 F.R.L. combination |
| Port size | 1/4" (PT thread) |
| Filtering grade | 40 µm |
| Pressure range | 0.15 - 0.4 MPa (20 - 58 psi) |
| Type | Lower pressure |
| Bowl material | PC |
| Drain type | Semi-auto drain + manual drain |
| Fluid | Air |
|---|---|
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Capacity of drain bowl | 60 cc |
| Capacity of oil bowl | 98 cc |
| Recommended lubricant | ISO VG 32 or equivalent |
| Weight | 1300 g |
Specifications follow the official AirTAC GAC catalogue (pages 216-217). Air must not freeze in the unit. No gauge is supplied with this model — the gauge connection on a GAC300 is 1/8" if you add one.
Model Code: Airtac GAC F.R.L. Unit GAC30008LN
| GAC300 | GA300 series F.R.L. unit — sets ports, bowl capacity and weight. |
|---|---|
| (blank) | Bowl material: PC. Available on this body: PC (blank), Metal (C), Nylon (N). |
| 08 | Port size 1/4". This body offers 08 = 1/4", 10 = 3/8", 15 = 1/2". |
| (blank) | Drain: Semi-auto drain + manual drain. |
| L | Lower pressure type — 0.15 - 0.4 MPa (20 - 58 psi). This body offers Standard (S) or Lower pressure (L). |
| N | No pressure gauge; 1/8" gauge connection. |
| (blank) | Filtering grade 40 µm. |
| (blank) | PT thread; gauge scale MPa / psi. |
| (blank) | No reverse-flow valve. |
Constituent units, orderable separately as spares: GAF300-08 filter, GAR300-08 regulator, GAL300-08 lubricator — all three share this body and port.
Size Class & Flow Envelope
- GAC2001/8"-1/4" · 1750 L/min
- GAC3001/4"-1/2" · 3000 L/min
- GAC4003/8"-1/2" · 6000 L/min
- GAC5003/4" · 7000 L/min
- GAC6003/4"-1" · 12000 L/min
Figures are the end of the flow curve plotted in the AirTAC catalogue at 0.7 MPa inlet pressure — a sizing envelope for comparing bodies, not a rated flow. Read the catalogue curve for a real duty point. Outlet pressure falls as flow rises, so size a body with headroom above your peak demand.
| This model | GAC300 · 1/4" · curve to 3000 L/min |
|---|---|
| One size down | GAC200 |
| One size up | GAC400 (curve to 6000 L/min) |
| Build order | Filter → bracket → regulator → lubricator |
Where the Airtac GAC F.R.L. Unit GAC30008LN Is Used
Low-Force Assembly Jigs
Feeds delicate pneumatic pick-and-place arms where a 0.4 MPa ceiling prevents actuator damage during grip and release cycles.
Light-Duty Sealing Heads
Conditions air for heat-sealing machinery that relies on gentle cylinder pressure to consistently crimp film without crushing the product.
Laboratory Gas Panels
Prepares supply air for low-pressure test fixtures and fluidic transfer pumps, ensuring moisture and grit are removed before the 40 um barrier.
Is the Airtac GAC F.R.L. Unit GAC30008LN the Right Air-Prep Unit?
Choose this lower-pressure L type for equipment strictly capped at 0.4 MPa, and remember that if the machine may ever need more, this is the wrong part. The PC bowl is standard, but always confirm material compatibility for aggressive surroundings. Since no gauge is included, the set pressure cannot be read without adding one to the 1/8in connection. If the downstream line must stay oil-free, omit the lubricator and choose a filter-regulator instead. The separate spares are GAF300-08, GAR300-08 and GAL300-08. The catalogue flow curve for the GAC300 is plotted to 3000 L/min at 0.7 MPa inlet, which is 50% of the GAC400's 6000 L/min envelope. Note that 0.4 MPa is about 44% of the Standard type's 0.9 MPa ceiling.
Quick checklist
- ✓ Body size for your peak flow (1/4" here)
- ✓ Standard 0.9 MPa or lower-pressure 0.4 MPa
- ✓ Bowl material: PC (blank), Metal (C), Nylon (N)
- ✓ Drain: semi-auto + manual, or automatic
- ✓ Element 40 µm or 5 µm
- ✓ Thread & gauge scale (PT / G / NPT)
Installation & Maintenance Notes
- check Install with the airflow arrow: filter first, lubricator last.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Fill the oil bowl with ISO VG 32 or equivalent only.
- check Drain condensate before the 60 cc bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Support the 1300 g unit on its bracket, not on the tubing.
The lubricator adds an oil mist downstream of the regulator. If any part of the line must stay oil-free, use a filter-regulator instead of an F.R.L. combination on that branch.
Airtac GAC F.R.L. Unit GAC30008LN FAQ
This lower-pressure unit regulates from 0.15-0.4 MPa (20-58 psi). It shares the common maximum pressure of 1.0 MPa (145 psi) and a 1.5 MPa (215 psi) proof pressure. The operating temperature is -5 to 70 C, and the recommended lubricant is ISO VG 32. The drain bowl holds 60 cc, the oil bowl holds 98 cc, and the assembly weighs 1300 g.
The N after the port code means no circular gauge is supplied, so you must install your own on the 1/8in connection to read the setpoint. The L indicates the lower-pressure type, restricting adjustment to a 0.4 MPa ceiling instead of the standard 0.9 MPa, which suits sensitive equipment but prevents high-force output.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for Airtac GAC F.R.L. Unit GAC30008LN
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, stock and lead time — usually within 7-8 hours.