AirTAC GF600-20 Filter (GF60020AW)
The AirTAC AirTAC GF600-20 Filter (GF60020AW) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 5 µm element, with PT3/4" ports and a automatic drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT3/4"
- Filtering grade5 µm
- DrainAutomatic drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialAluminium alloy
- ThreadPT
- BracketMounting bracket included
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF600-20 Filter (GF60020AW)
GF60020AW is a genuine AirTAC GF-series air filter for compressed air only. It removes water and fine particulate from the line - it does not regulate pressure and it does not lubricate. This size 600 configuration has a PT3/4 (PT) port, the finer 5 um (W) filter element and a differential-pressure drain. The 600-size bowl is aluminium alloy, the maximum working pressure is 1.0 MPa (145 psi), and the working temperature range is -5 to 70 C (non-freezing). The blank bracket position means a mounting bracket is included.
This is a genuine AirTAC part. The GF family spans sizes 200, 300, 400 and 600 with a choice of port, PT/G/NPT thread, 40 um standard or 5 um (W) filtration, and differential-pressure, automatic or manual drains. Flow figures are published as curves rather than a single rated number - ask us and we will confirm the datasheet for this exact model on request.
AirTAC GF600-20 Filter (GF60020AW) Technical Specifications
| Model | AirTAC GF600-20 Filter (GF60020AW) |
|---|---|
| Series | GF600 air filter |
| Port size | PT3/4" (PT thread) |
| Filtering grade | 5 µm |
| Drain type | Automatic drain |
| Bracket | Mounting bracket included |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | Aluminium alloy |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF600-20 Filter (GF60020AW)
| GF600 | G-series air filter, 600 body — sets the port range. |
|---|---|
| 20 | Port size PT3/4". This body offers 20 = PT3/4", 25 = PT1". |
| A | Drain: Automatic drain. Options are differential (blank), automatic (A) or manual (M). |
| (blank) | Mounting bracket included. A bracket ships by default; J orders it without. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF600 · PT3/4" · 5 µm |
|---|---|
| One size down | GF400 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF600-20 Filter (GF60020AW) Is Used
Plant air header drop for pneumatic tools
Mounted on the bracket at a 3/4 in drop from the main plant air header, it strips water and fine debris before assembly-line impact tools and air ratchets.
Maintenance-shop filtration station
A bracketed point-of-use filter at the maintenance shop's air reel, giving technicians clean, dry air for job-site pneumatic equipment brought in for service.
Truck fleet service bay air
Conditions the compressed air used in commercial-vehicle service bays for brake-system testing and air-tool work, catching water and grit before it enters vehicle air circuits.
Is the AirTAC GF600-20 Filter (GF60020AW) the Right Filter?
This is the fine-filtration, bracketed version of the 600-size, 3/4 in PT frame: the W suffix selects the 5 um element instead of the 40 um standard, and the blank bracket position includes a mounting bracket for panel or wall fixing. The drain is the default differential-pressure type; automatic (A) and manual (M) drains are catalogue alternatives. Thread is PT as standard, with G (BSPP) and NPT (T) available as catalogue options. Flow is published as curves, not a single rating, so please ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT3/4" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 5 µm element when pressure loss rises.
The aluminium-alloy bowl on the GF600 suits harsher environments than a PC bowl. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF600-20 Filter (GF60020AW) FAQ
AirTAC publishes GF flow as performance curves rather than a single rated figure, so we do not quote one number here. Send us your line pressure and required flow and we will confirm the sizing from the datasheet on request.
Yes. The blank bracket position on GF60020AW means a bracket is included; if you do not need one, the J-suffixed version of the same 600-size, PT3/4, 5 um filter is supplied without a bracket.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF600-20 Filter (GF60020AW)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.