Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø16mm bore and 200mm stroke, M5×0.8 air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ16 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM6×1.0
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S
Product changeovers get simpler with the MAJ16X200-30S: this double-acting Dia 16 mini cylinder carries a 30 mm adjustable extend window, so a single 200 mm actuator is re-set for different product heights or part sizes by turning an external stop screw. Force output is 100.5 N push and 86.4 N pull at 0.5 MPa, or 140.7 N push at 0.7 MPa, supplied with 0.15-1.0 MPa (22-145 psi) air through M5x0.8 connections.
The MA build is a rolling-packed, round-body unit: stainless barrel, aluminium covers, and a 6 mm rod hard-chrome plated to 20 um for corrosion resistance in humid or lightly washed environments. Fixed bumper pads ease the impact at both stroke ends (no adjustable air cushion - that belongs to the MACJ type), and the standard-built magnet accepts CMSG / DMSG / EMSG switches without special ordering. For sizing, figure about 60 N of practical working force at 0.5 MPa, enough to lift roughly 5 kg vertically with a 2:1 margin.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø16 mm |
| Stroke | 200 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 86 N |
| 0.7 MPa | 141 N | 121 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 16 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S Is Used
Pallet stopper gate
Raise and lower a stop blade for small pallets or trolleys on an assembly conveyor, re-trimming the 30 mm window per pallet type.
Tray index pusher
Push lab sample trays one station along a shuttle rail, with stroke length adjusted between tray formats on the same machine.
Small-part ejector pin
Eject finished brass fittings from a compact press die, setting eject depth with the stop screw instead of changing spacers.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S the Right Cylinder?
Compare output before committing: 100.5 N push and 86.4 N pull at 0.5 MPa suits light gating, pressing and ejecting, while a 20 mm bore MAJ raises push to 157.0 N at the same pressure if the load is heavier. The 30 mm stop screw is an extend-stroke end stop only - the rod is free to move if air pressure drops, so it must not be treated as a load lock. Fix it with an FA flange or LB foot, fit an I or Y rod knuckle where needed, and keep side loads off the 6 mm rod over the full 200 mm stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S FAQ
Push is 100.5 N and pull 86.4 N at 0.5 MPa; at 0.7 MPa the cylinder reaches 140.7 N push and 120.9 N pull, with a theoretical maximum of 20.5 kgf at 1.0 MPa. Speed range is 30-800 mm/s at 0.15-1.0 MPa (22-145 psi).
The high-precision stainless-steel barrel plus the hard-chrome plated rod resist mild corrosion, splash and washdown far better than painted-steel or plain aluminium mini cylinders, making the MAJ a practical choice for damp food, lab or outdoor stations within its 0-70 C temperature range.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ16X200-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.