Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S
Fine-trim duty is the brief here: a 10 mm window on 75 mm of travel gives the MAJ25X75-10S tight control over where the rod parks on extend, set with an external stop screw once the machine is timed. Double-acting construction keeps the return powered too. It runs on 40 um filtered air between 0.15-1.0 MPa (22-145 psi) and 30-800 mm/s. Expect 245.3 N forward and 206.1 N back at 0.5 MPa supply.
The barrel is drawn stainless tube rolled tight against aluminium end covers, a riveted round body that stays slim in cramped fixtures, while the 10 mm rod is hard-chrome plated for wear resistance. For sizing, budget near 147 N of dependable force at 0.5 MPa, which balances a part of about 12 kg in a vertical lift with margin to spare. Bumper pads are fitted at both stroke ends, and the built-in magnet pairs with CMSG, DMSG or EMSG switches out of the box.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S Is Used
Bottling filler depth set
Fill-nozzle height adjustment on a small bottling carousel, pinned to the last 65-75 mm of descent for consistent fill levels.
Glue bead kicker
Adhesive bench station that seats a part against a glue bead on an assembly jig, trimmed once per changeover.
Sorting chute diverter
A chute flap on a small-parts sorting rack that swings parcels between two bins, with a DMSG switch reading each end position.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S the Right Cylinder?
One bore down, the 20 mm MAJ pushes 157 N; one up, the 32 mm reaches 402.2 N, so 245.3 N at 0.5 MPa lands this model mid-pack for clamps and kickers. The -10 trim is a mechanical stop that sets the extend limit only - it will not carry a suspended load if air pressure drops. Choose FA or LB mounting, add an I or Y knuckle for linkages, and keep side loads off the rod at this 75 mm reach.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S FAQ
Here are the key outputs: 245.3 N push and 206.1 N pull at 0.5 MPa, climbing to 343.4 N and 288.5 N respectively at 0.7 MPa, with 50 kgf as the 1.0 MPa theoretical limit. The rod measures 10 mm with an M10x1.25 thread, the port size is 1/8", and pressure runs 0.15-1.0 MPa (22-145 psi).
The stainless barrel, hard-chrome rod and aluminium covers resist mild corrosion and damp far better than painted steel minis, though it is not a certified food-grade or IP-rated unit - confirm sealing needs from the datasheet before chemical spray or submersion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ25X75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.