Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S
A wide 100 mm tuning range is the headline here: order MAJ32X150-100S and the extend stroke of this bore 32, 150 mm cylinder can be wound in anywhere inside that window by the external stop screw. Air on both ports drives 402.2 N forward and 345.6 N back at 0.5 MPa, rising to 563.0 N at 0.7 MPa.
This is a rolled, round-body mini cylinder - stainless barrel, aluminium covers, hard-chrome 12 mm rod - so it shrugs off the humidity that peels paint off steel minis. Half the rated push works out to roughly 20 kg of vertical lift at 0.5 MPa, a quick way to size pick-up heads against real part weight. The magnet and fixed bumper pads are built in; CMSG, DMSG and EMSG switches clip on without any special order.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -100 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S Is Used
Case push-off on packaging lines
Clears 300 g cartons from a belt transfer at 30-800 mm/s with 402 N behind it, the 100 mm window absorbing product-size changes.
Sample tray positioning
Advances lab trays into an analyser bay; engineers trim the stroke in fine steps instead of re-ordering a different cylinder length.
Reject finger on a filler discharge
Diverts dented cans off a filling line, with DMSG switches confirming the retracted park through the built-in magnet.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S the Right Cylinder?
For pushes past 400 N at 0.5 MPa, bore 32 is the sweet spot: the MAJ25 tops out at 245.3 N and the MAJ40 starts at 628.3 N, so size from those anchors. On a 150 mm stroke keep side load off the 12 mm rod or add external guiding - a rod this diameter tolerates little bending. FA flange and LB foot mounts, I and Y knuckles, and the standard magnet (CMSG / DMSG / EMSG) round out the order. The stop screw fixes position at end of extend only; with air off the rod can creep, so never treat it as a holding device.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S FAQ
Push 402.2 N and pull 345.6 N at 0.5 MPa; push 563.0 N and pull 483.8 N at 0.7 MPa; 82 kgf theoretical maximum at 1.0 MPa. Stroke is 150 mm with a 100 mm adjustable extend window, port 1/8", rod thread M10x1.25, operating pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
An external stop screw shortens the 150 mm extend stroke to any length inside the ordered 100 mm window; it cannot extend the stroke beyond 150 mm. Set it once during commissioning and re-check after the first runs. Note it is an end stop, not a mid-stroke lock - under air loss the piston still drifts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X150-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.