Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S
The AirTAC Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S is a genuine double acting, adjustable stroke standard round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke500 mm
- Port size1/8"
- Acting typeDouble acting, adjustable stroke
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S
The MAJ32X500-40S pairs a bore 32 piston with a 500 mm stroke and a 40 mm adjustable window: an external stop screw trims the extend stroke anywhere in that 40 mm range without swapping cylinders. It is double-acting, so air drives the rod out and back, and push force at 0.5 MPa reaches 402 N against 346 N on retract. Keep real work around 241 N of the rating at 0.5 MPa and the barrel keeps a comfortable margin in continuous duty.
A rolled stainless barrel with a hard-chrome plated 12 mm rod shrugs off washdown mist and outdoor damp far better than painted mini cylinders, and the riveted round body stays slim on long-travel machines. Every unit carries a built-in magnet, so CMSG, DMSG or EMSG switches clip on without a special-order piston. The fixed anti-impact pad softens stroke-end impact but is not an adjustable cushion - that feature belongs to the MACJ range.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S Technical Specifications
| Model | Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S |
|---|---|
| Series | MAJ mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S
| MAJ | Standard round-body mini cylinder (adjustable-stroke). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S Is Used
Long-travel gate actuation on packaging lines
Extends a 500 mm sweep to push cartons onto an off-feed conveyor; the 40 mm window lets technicians fine-tune the end position after each changeover.
Panel press-off in automotive trim shops
402 N at 0.5 MPa knocks bonded trim panels free from fixtures; working at about 241 N keeps cycle forces predictable and gentle.
Switched positioning on washdown food conveyors
The stainless barrel survives daily hose-downs while a DMSG switch confirms full extension at the trimmed stop point.
Is the Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S the Right Cylinder?
At 402 N push (0.5 MPa) this bore 32 sits above the MAJ25 (245 N) and below the MAJ40 (628 N); step down when the load is light, step up when you need over 400 N at half pressure. The stop screw is a mechanical end stop for the extend stroke only - if air is lost the piston can still drift, so add a separate brake for load holding. On a 500 mm stroke, guide the load externally: side loads bend the 12 mm rod and wear seals early. Mount with the FA flange or LB foot, add an I or Y rod knuckle for pivoting links, and run 0.15-1.0 MPa (22-145 psi) filtered air at 30-800 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Bumper models: keep speed within the rated range.
- check Installation by qualified personnel per AirTAC docs.
Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S FAQ
At 0.5 MPa the bore 32 barrel pushes 402 N and pulls 346 N; at 0.7 MPa that rises to 563 N push and 484 N pull. The theoretical ceiling is 82 kgf at 1.0 MPa. The port is 1/8 in, the rod thread M10x1.25, and the 500 mm stroke trims within a 40 mm window via the stop screw.
The magnet is built into every MAJ piston as standard, so CMSG, DMSG or EMSG reed switches mount directly on the stainless barrel. The anti-impact bumper pads at each end are fixed - they decelerate the stroke but are not adjustable air cushions; specify the MACJ series when cushioning is needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MAJ Double Rod Adjustable Stainless Steel Mini Cylinder MAJ32X500-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.