Airtac SAI100 Standard Air Cylinder SAI100X1000S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 1000mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke1000 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAI100 Standard Air Cylinder SAI100X1000S
The AirTAC SAI100X1000-S is a double-acting ISO 15552 profile cylinder with a 100 mm bore and 1000 mm stroke. It delivers a push force of 3927 N at 0.5 MPa and 5497 N at 0.7 MPa, making it suitable for heavy-duty positioning over extended distances. The extruded aluminum barrel features sensor grooves on both sides, and the included -S magnet allows seamless integration with CMSE or DMSE reed switches for precise end-of-stroke detection.
Built to exacting ISO 15552 dimensional standards, this tie-rod-less profile cylinder serves as a drop-in replacement for other ISO 15552 interface actuators. The standard carbon steel piston rod provides robust durability for industrial loads, while the adjustable air cushions at both ends ensure smooth deceleration at the stroke extremes.
Airtac SAI100 Standard Air Cylinder SAI100X1000S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X1000S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X1000S Is Used
Long-Stroke Material Handling
Drives heavy pallet transfers and pushers across 1000 mm distances where full extension and retraction are required for packaging lines.
Heavy Press Positioning
Utilizes the 5497 N push force at 0.7 MPa to move heavy tooling carts or position welding fixtures in automotive assembly cells.
Automated Stacking
Elevates components to 1000 mm heights in automated storage systems, relying on the -S magnet for reliable upper limit detection.
Is the Airtac SAI100 Standard Air Cylinder SAI100X1000S the Right Cylinder?
This 1000 mm stroke represents the maximum standard extension for the 100 mm bore. If an application requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, while moving up to a 125 mm bore provides 6136 N. For strokes of 1000 mm, the extended rod is highly susceptible to bending under side loads; utilizing an external guide rail or a fully guided cylinder is strongly recommended to prevent premature rod-bearing wear.
The SAI100X1000-S uses a G1/2 port and an M20x1.5 rod thread. It is dimensionally interchangeable per ISO 15552 mounting interfaces, supporting accessories like FA flanges or TC trunnions. Note that a standard SAI cylinder will drift if air pressure is lost; for dead-end holding, consider the SAIL variant with an air-released lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X1000S FAQ
The SAI100X1000-S generates a push force of 3927 N at 0.5 MPa and 5497 N at 0.7 MPa. The pull force at 0.5 MPa is 3681 N.
Yes, the SAI100X1000-S is dimensionally interchangeable with other ISO 15552 profile cylinders. You can use it as a drop-in replacement using standard FA, FB, or TC mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.