Airtac SAI100 Standard Air Cylinder SAI100X35S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X35S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 35mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke35 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI100 Standard Air Cylinder SAI100X35S
The AirTAC SAI100X35-S is a double-acting ISO 15552 profile cylinder engineered for high-force tasks, delivering a push thrust of 3927 N at 0.5 MPa. Its 35 mm stroke is optimal for short-travel clamping and heavy pressing operations. The extruded aluminum barrel omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting interfaces.
This specific configuration features a carbon steel piston rod and includes a magnetic piston (-S) for position sensing. The dual sensor grooves on the barrel accept CMSE or DMSE switches, and the ports utilize PT tapered threads. For high-temperature environments, the standard TPU seals can be swapped for Viton (H).
Airtac SAI100 Standard Air Cylinder SAI100X35S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X35S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X35S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X35S Is Used
Heavy Duty Clamping
Generates 3927 N of clamping force at 0.5 MPa to secure heavy metal workpieces during machining operations.
Short Stroke Pressing
Ideal for compact pressing and stamping stations requiring high force over a brief 35 mm travel distance.
Pallet Stops
Acts as a robust stopper mechanism on high-mass conveyor lines, utilizing the magnetic piston for timing control.
Is the Airtac SAI100 Standard Air Cylinder SAI100X35S the Right Cylinder?
If an application requires less force, stepping down to an 80 mm bore yields 2513 N at 0.5 MPa, whereas larger loads might need a 125 mm bore providing 6136 N. Because this is a short 35 mm stroke, side-load bending is minimal, but always ensure the load is guided to prevent rod bearing wear. The adjustable air cushions at both ends decelerate the piston effectively. Remember that an unmodified SAI cylinder will drift if air pressure is lost; use the SAIL variant or an external pilot-operated check valve for fail-safe position holding. This unit mounts via standard accessories like FA flanges or TC trunnions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X35S FAQ
At an operating pressure of 0.5 MPa, the push force is 3927 N, and the pull force is 3681 N. At 0.7 MPa, the push force increases to 5497 N.
Yes, the SAI100X35-S is dimensionally interchangeable per ISO 15552 standards. It functions as a drop-in replacement for other ISO 15552 profile cylinders, utilizing a G1/2 port and standard mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.