Airtac SAI100 Standard Air Cylinder SAI100X600S
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X600S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 600mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke600 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI100 Standard Air Cylinder SAI100X600S
The AirTAC SAI100X600-S is a double-acting ISO 15552 profile cylinder featuring a 100mm bore and a 600mm stroke. It generates 3927N of push force and 3681N of pull force at 0.5 MPa, making it well-suited for heavy-duty positioning tasks. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 actuators.
This specific configuration includes a standard carbon steel piston rod and a built-in magnet (-S) for position sensing. The dual sensor grooves molded into the barrel profile allow for direct clip-on mounting of CMSE or DMSE reed switches without requiring additional brackets, streamlining automation assembly.
Airtac SAI100 Standard Air Cylinder SAI100X600S Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X600S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X600S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X600S Is Used
Automotive Body Welding
Handles heavy frame positioning on welding lines, utilizing the 3927N thrust at 0.5 MPa to move large steel structures reliably.
Pallet Accumulation
Stops and diverts loaded pallets along material handling conveyors, relying on the 600mm stroke to clear the transport path completely.
Heavy Carton Pushing
Ejects large packaged goods from packaging machines, where the 100mm bore provides the necessary force to overcome box friction.
Is the Airtac SAI100 Standard Air Cylinder SAI100X600S the Right Cylinder?
This 100mm bore provides 3927N of thrust at 0.5 MPa; if your application requires less force, stepping down to the 80mm bore yields 2513N, whereas the 125mm bore offers 6136N for heavier loads. At 600mm of stroke, the unsupported piston rod is highly susceptible to bending under side loads. To prevent premature rod-bearing wear, implement an external linear guide or utilize a guided cylinder to absorb lateral forces.
As a true ISO 15552 profile cylinder, this model serves as a direct dimensional replacement for standard 100mm bore actuators. Ensure your setup specifies a G1/2 port, PT thread type, appropriate mounting accessories (such as FA flange or TC trunnion), and a magnet for sensor compatibility. Note that the adjustable air cushions only decelerate the piston at stroke ends; they do not hold loads. If power drops, the rod will drift. For fail-safe holding, consider the SAIL variant with an air-released lock or the BSAI bidirectional clamp-lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X600S FAQ
The SAI100X600-S cylinder provides a push force of 3927N and a pull force of 3681N at 0.5 MPa. At 0.7 MPa, the push force increases to 5497N.
Yes, the SAI100X600-S is a genuine ISO 15552 profile cylinder, making it dimensionally interchangeable with other standard 100mm bore ISO 15552 actuators. Match the G1/2 port and mounting interface for a drop-in fit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.