Airtac SAI100 Standard Air Cylinder SAI100X750
The AirTAC Airtac SAI100 Standard Air Cylinder SAI100X750 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 750mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke750 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI100 Standard Air Cylinder SAI100X750
The AirTAC SAI100X750 is a double-acting ISO 15552 profile cylinder engineered to deliver a robust 3927N push force at 0.5 MPa. Its extruded aluminum barrel design omits tie rods, providing a clean exterior that integrates seamlessly into existing ISO 15552 mounting interfaces. The 750mm stroke is ideal for automated machinery requiring substantial linear travel.
This specific configuration utilizes a standard carbon steel piston rod and a PT tapered G1/2 port. For environments requiring position feedback, the barrel features dual sensor grooves ready to accept CMSE or DMSE switches when a magnet is specified. The standard TPU seals handle temperatures from -20 to +70 C, while a high-temperature Viton option is available for demanding thermal exposures.
Airtac SAI100 Standard Air Cylinder SAI100X750 Technical Specifications
| Model | Airtac SAI100 Standard Air Cylinder SAI100X750 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI100 Standard Air Cylinder SAI100X750
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI100 Standard Air Cylinder SAI100X750 Is Used
Heavy Material Handling
Drives large pneumatic lifts and heavy-duty transfer arms requiring a 3927N push force across a 750mm travel distance.
Automated Assembly Lines
Actuates multi-stage assembly stations where long-stroke component separation or heavy press operations are necessary.
Pallet Positioning
Indexes large loaded pallets along conveyor networks, utilizing the adjustable end cushions to stop heavy masses smoothly.
Is the Airtac SAI100 Standard Air Cylinder SAI100X750 the Right Cylinder?
Selecting this 100mm bore over the smaller 80mm variant significantly increases thrust, stepping up from 2513N to 3927N at 0.5 MPa. If your application requires even greater force, the 125mm bore offers 6136N under the same pressure. Because the 750mm stroke generates an extended lever arm, side loads can severely stress the rod bearing and cause premature wear. Utilizing an external guide rail or a fully guided cylinder is strongly recommended to prevent rod deflection.
The adjustable air cushions at both ends decelerate the piston near stroke completion, but they do not lock the load. If your machinery must hold a position securely during a loss of air pressure, incorporate an external pilot-operated check valve or transition to the SAIL locking variant. This model is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a G1/2 port, standard mounting accessories, and an optional -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI100 Standard Air Cylinder SAI100X750 FAQ
At a 0.5 MPa operating pressure, this 100mm bore cylinder provides 3927N of push force and 3681N of pull force. At 0.7 MPa, the push force increases to 5497N.
Yes, the SAI100X750 is a genuine ISO 15552 profile cylinder. Its standardized mounting interface and dimensions make it fully interchangeable with other ISO 15552 cylinders, allowing for seamless retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAI100 Standard Air Cylinder SAI100X750
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.