Airtac SAI80 Standard Air Cylinder SAI80X10
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke10 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X10
The AirTAC SAI80X10 is a double-acting ISO 15552 profile cylinder engineered for very short stroke actuation. Delivering a push force of 2513 N at 0.5 MPa, it handles heavy clamping and holding tasks in confined spaces. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
This specific configuration features a standard carbon steel piston rod and PT tapered port threads. Because it lacks the -S magnet option, it operates without integrated position sensing. For environments requiring elevated thermal resistance, the standard TPU seals can be swapped for Viton (H) or NBR (N) alternatives.
Airtac SAI80 Standard Air Cylinder SAI80X10 Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X10 Is Used
Short-Stroke Clamping
Ideal for securing heavy metal workpieces during machining operations where only 10 mm of travel is needed to lock the part in place.
Ejection Systems
Provides a robust 2513 N punch to eject dense parts from molds or press beds within extremely tight axial clearances.
Heavy Duty Pinning
Used to drive solid pins or locators into assemblies with high force requirements where a guided external stop limits the travel distance.
Is the Airtac SAI80 Standard Air Cylinder SAI80X10 the Right Cylinder?
Select this 80 mm bore when an application demands high force over a minimal 10 mm distance. If your setup requires slightly less thrust, stepping down to a 63 mm bore yields 1559 N at 0.5 MPa. Conversely, moving up to a 100 mm bore provides 3927 N at 0.5 MPa for heavier loads.
Because the stroke is exceptionally short, side-load stress on the rod bearing is minimal compared to longer units. Remember that a standard double-acting cylinder relies on continuous air pressure to maintain its position; if pressure drops, the load will drift. For dead-end holding without live pressure, consider the SAIL or BSAI locking variants.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X10 FAQ
At 0.5 MPa operating pressure, the SAI80X10 provides a push force of 2513 N and a pull force of 2268 N. At 0.7 MPa, the push force increases to 3518 N.
Yes, the SAI80X10 is dimensionally interchangeable per ISO 15552. It shares standard mounting dimensions with other ISO 15552 profile cylinders, allowing for direct drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.