Airtac SAI80 Standard Air Cylinder SAI80X1000S
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X1000S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X1000S
The AirTAC SAI80X1000-S is a double-acting profile cylinder built to the ISO 15552 standard, ensuring exact dimensional interchangeability for seamless drop-in replacements. It features an extruded aluminum barrel without tie-rods, yielding a clean profile while housing a magnetic piston ready for CMSE or DMSE position sensing.
Providing a robust push force of 2513 N and pull force of 2268 N at 0.5 MPa, this 80 mm bore configuration is tailored for substantial actuation tasks. The 1000 mm stroke handles extended travel requirements. Standard carbon steel rod construction provides durable service in typical industrial environments, while adjustable air cushions at both ends manage impact deceleration.
Airtac SAI80 Standard Air Cylinder SAI80X1000S Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X1000S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X1000S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X1000S Is Used
Extended Material Transfer
Ideal for pushing heavy pallets or product carriers over long distances on automated conveyor lines where a full 1000 mm stroke is required.
Large Door Actuation
Provides the necessary push force and extended travel to open and close large industrial machine guarding doors or heavy access panels.
Automated Assembly Presses
Suitable for applying moderate holding or pressing forces over a long linear distance in automated assembly machinery.
Is the Airtac SAI80 Standard Air Cylinder SAI80X1000S the Right Cylinder?
This 80 mm bore generates 2513 N of push thrust at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N; conversely, the 100 mm bore offers 3927 N for heavier loads. Because this model features a 1000 mm stroke, the extended rod is highly susceptible to bending under side loads. Employing an external guide rail or transitioning to a guided cylinder is strongly recommended to prevent premature rod-bearing wear.
Equipped with a magnetic piston (-S), it seamlessly integrates with CMSE and DMSE series reed switches fitted into the dual sensor grooves on the barrel. The fluid porting utilizes a PT G3/8 thread. Remember that the standard adjustable cushions only decelerate the piston near stroke ends; they do not function as a holding brake. If the machinery must maintain vertical load position during a complete loss of air pressure, specify the SAIL (air-released lock) or BSAI (bidirectional clamp-lock) variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X1000S FAQ
At an operating pressure of 0.5 MPa, the SAI80X1000-S provides a push (extend) force of 2513 N and a pull (retract) force of 2268 N. At 0.7 MPa, the push force increases to 3518 N.
Yes, the SAI80X1000-S is a genuine ISO 15552 profile cylinder, meaning its mounting dimensions are fully interchangeable with other ISO 15552 cylinders, allowing for a direct drop-in replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X1000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.