Airtac SAI80 Standard Air Cylinder SAI80X175S
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X175S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X175S
The AirTAC SAI80X175-S is a double-acting ISO 15552 profile cylinder offering a robust 2513N push force at 0.5MPa. Its 175mm stroke is well-suited for mid-range automation tasks requiring substantial linear thrust. The extruded aluminum barrel design omits tie rods, providing a clean exterior that simplifies the mounting of external hardware.
This variant includes a magnet for position sensing and ships with a standard carbon steel piston rod. The barrel features dual sensor grooves, allowing seamless integration with CMSE and DMSE reed switches. For environments requiring higher thermal stability, the seal stack can be upgraded from standard TPU to Viton (H).
Airtac SAI80 Standard Air Cylinder SAI80X175S Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X175S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X175S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X175S Is Used
Automated Pressing
Provides the 2513N force needed to seat bearings and assemble small mechanical components reliably.
Heavy Material Diversion
Actuates heavy-duty diverter arms on packaging lines, using the magnet for mid-stroke position confirmation.
Pallet Handling
Lifts and positions loaded pallets in automated storage systems where a 175mm stroke is optimal.
Is the Airtac SAI80 Standard Air Cylinder SAI80X175S the Right Cylinder?
If your application requires less force, the SAI63 bore provides 1559N at 0.5MPa, whereas stepping up to the SAI100 yields 3927N. The 175mm stroke sits below the 300mm threshold, keeping rod-bearing bending stress manageable for standard loads, though heavy off-center payloads still warrant an external guide. This model uses a G3/8 port and M20x1.5 rod thread.
Bear in mind that the adjustable air cushions at both ends only decelerate the piston near stroke completion; they do not lock the rod. If your machinery must hold a vertical load securely without continuous air pressure, integrate the SAIL (air-released lock) or BSAI (clamp-lock) variant instead of relying on a standard cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X175S FAQ
At 0.5MPa, this 80mm bore cylinder provides 2513N of push force and 2268N of pull force. At the maximum 1.0MPa operating pressure, it delivers a theoretical push force of 513kgf.
Yes. The SAI series is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other standard profile cylinders of the same bore size, provided you match the mounting interface and port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.