Airtac SAI80 Standard Air Cylinder SAI80X230S
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X230S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke230 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X230S
The AirTAC SAI80X230-S is a double-acting ISO 15552 profile cylinder engineered to deliver 2513 N of push force and 2268 N of pull force at 0.5 MPa. With an extended stroke of 230 mm, this unit is built for tasks requiring substantial linear displacement. The extruded aluminum barrel design omits tie rods, providing a smooth exterior that simplifies cleaning and reduces debris accumulation in automated machinery.
Equipped with a magnetic piston, this model directly supports CMSE and DMSE reed switches for precise end-of-stroke positioning. The standard carbon steel piston rod ensures high tensile strength for industrial loads, while the integrated adjustable air cushions at both ends absorb impact energy to extend component lifespan.
Airtac SAI80 Standard Air Cylinder SAI80X230S Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X230S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X230S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X230S Is Used
Automated Pressing
Provides reliable 2513 N clamping pressure at 0.5 MPa for seating bearings and assembling press-fit components in automated fabrication cells.
Material Diversion
The 230 mm stroke offers the extended reach needed to actuate large diverter arms and sorting gates across wide product handling conveyors.
Pallet Handling
Generates the necessary push and pull force to index heavy pallets or lift station platforms, utilizing its magnetic piston for position feedback.
Is the Airtac SAI80 Standard Air Cylinder SAI80X230S the Right Cylinder?
Choose this 80 mm bore when an SAI63X200 falls short on thrust, as stepping up from the 63 mm bore increases your 0.5 MPa push force from 1559 N to 2513 N. The 230 mm stroke provides ample extension for mid-range actuation, but because the unsupported rod length is significant, you must manage side loads using external guide rails or a guided cylinder carriage to prevent rod-bearing bending.
This profile cylinder offers drop-in dimensional interchangeability with other ISO 15552 units, matching the standard 80 mm bore mounting footprint and G3/8 PT ports. Remember that the standard SAI does not hold loads without live air pressure; if your fixture drops when air is exhausted, specify the SAIL variant with an air-released lock or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X230S FAQ
At a 0.5 MPa operating pressure, this 80 mm bore cylinder generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N.
No, the standard SAI cylinder will drift or drop if air pressure is lost or the valve is centered. For vertical load holding without live pressure, use the SAIL variant with an air-released lock or a BSAI clamp-lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.