Airtac SAI80 Standard Air Cylinder SAI80X550
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X550 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 550mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke550 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X550
The AirTAC SAI80X550 is a double-acting ISO 15552 profile cylinder built for heavy-duty automation. It delivers a robust 2513N push force at 0.5 MPa, making it well-suited for demanding material handling tasks. The 550mm stroke provides ample travel for automated clamping and lifting stations.
This model features a standard carbon steel piston rod for high tensile strength and durability. The extruded aluminum barrel includes integrated sensor grooves on both sides, allowing for flexible mounting of CMSE or DMSE position switches when a magnet is specified. Adjustable air cushions at both ends ensure smooth deceleration of large moving masses.
Airtac SAI80 Standard Air Cylinder SAI80X550 Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X550 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X550
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X550 Is Used
Heavy-Duty Pressing
Generates 3518N of thrust at 0.7 MPa, ideal for assembling bearings and pressing heavy components into housings.
Pallet Diverting
The 550mm stroke provides the extended reach needed to push large pallets or workpieces off high-throughput conveyor lines.
Automated Lifting
Lifts substantial vertical loads in automated storage systems, utilizing adjustable cushions to protect payloads at stroke end.
Is the Airtac SAI80 Standard Air Cylinder SAI80X550 the Right Cylinder?
Select this 80mm bore cylinder when 50mm bore models (providing 982N at 0.5 MPa) lack the necessary thrust for your heavy fixtures. If your application requires even higher force, stepping up to a 100mm bore yields 3927N at 0.5 MPa. Because this unit features a 550mm stroke, external guides are highly recommended to prevent rod-bearing bending under side loads; a guided cylinder configuration will maximize service life.
For replacement parts, verify the 80mm bore, 550mm stroke, PT G3/8 port thread, and your required mounting accessory (such as LB foot or TC trunnion). Note that this standard SAI does not hold loads safely upon air loss; for fail-safe holding, integrate an external rod lock or specify the SAIL (air-released lock) variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X550 FAQ
At 0.5 MPa, this 80mm bore cylinder provides 2513N of push force and 2268N of pull force. At the standard 0.7 MPa operating pressure, the push force increases to 3518N.
Yes, the SAI80X550 is dimensionally interchangeable per ISO 15552. It serves as a drop-in replacement for other ISO 15552 profile cylinders, provided you match the 80mm bore, 550mm stroke, and G3/8 port.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X550
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.