Airtac SAI80 Standard Air Cylinder SAI80X630S
The AirTAC Airtac SAI80 Standard Air Cylinder SAI80X630S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 630mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke630 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAI80 Standard Air Cylinder SAI80X630S
The AirTAC SAI80X630-S is a double-acting ISO 15552 profile cylinder engineered for heavy-duty automation. It generates 2513 N of push force at 0.5 MPa and utilizes a 630 mm stroke to cycle large mechanisms. The extruded aluminum barrel omits tie rods, providing a smooth exterior that simplifies cleaning and sensor mounting.
Equipped with a magnetic piston (-S), this unit directly supports CMSE and DMSE reed switches via the integrated dual-side sensor grooves. The standard carbon steel piston rod offers high tensile strength for demanding industrial environments, while adjustable air cushions at both ends absorb end-of-stroke kinetic energy.
Airtac SAI80 Standard Air Cylinder SAI80X630S Technical Specifications
| Model | Airtac SAI80 Standard Air Cylinder SAI80X630S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 630 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAI80 Standard Air Cylinder SAI80X630S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×630 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAI80 Standard Air Cylinder SAI80X630S Is Used
Large Material Pushing
Provides the 2513 N push force required to index heavy pallets or push large metal blanks along a conveyor line over a 630 mm distance.
Pressing and Forming
Applies steady clamping pressure for light-duty pressing, bending, or holding large composite panels during secondary machining operations.
Vertical Lifting Gates
Actuates heavy vertical lifting doors or safety gates, utilizing the 630 mm stroke while relying on the adjustable cushions to soften the top stop.
Is the Airtac SAI80 Standard Air Cylinder SAI80X630S the Right Cylinder?
Selecting this 80 mm bore is ideal when a 63 mm bore (1402 N pull at 0.5 MPa) lacks the necessary thrust, but a 100 mm bore is physically too large. For a 630 mm stroke, the extended rod is highly susceptible to bending under side loads. Implement an external guide rail or use a guided cylinder to prevent premature rod-bearing wear and seal failure.
This model uses a G3/8 PT tapered port and includes a magnet for position sensing. If the machinery loses air pressure, the piston will drift and cannot hold a vertical load; integrate an external pilot-operated check valve or specify a SAIL lock variant for fail-safe holding. Being dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAI80 Standard Air Cylinder SAI80X630S FAQ
At 0.5 MPa operating pressure, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N.
Yes, the SAI80X630-S is dimensionally interchangeable per ISO 15552. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with an 80 mm bore and 630 mm stroke, matching the G3/8 port and mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAI80 Standard Air Cylinder SAI80X630S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.