Airtac SAU Standard Air Cylinder SAU50X195
The AirTAC Airtac SAU Standard Air Cylinder SAU50X195 is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 195mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ50 mm
- Stroke195 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAU Standard Air Cylinder SAU50X195
The AirTAC SAU50X195 is a double-acting profile-type standard cylinder featuring a 50 mm bore and a 195 mm stroke. Its extruded aluminum barrel makes it shorter and more compact than an ISO 15552 cylinder of the same bore, providing a distinct spatial advantage in tight machine layouts. It delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa, operating on a 1/4" port with an M16x1.5 rod thread.
For practical sizing, plan for a safe working load of roughly 589 N, which accounts for seal friction and smooth travel at 0.5 MPa. This translates to lifting about 50 kg vertically with a 2:1 safety margin. The unit uses adjustable air cushions at both ends to decelerate the piston near stroke end. Note that this specific SKU lacks a magnet, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches.
Airtac SAU Standard Air Cylinder SAU50X195 Technical Specifications
| Model | Airtac SAU Standard Air Cylinder SAU50X195 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø50 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAU Standard Air Cylinder SAU50X195
| SAU | Profile-type standard cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAU Standard Air Cylinder SAU50X195 Is Used
Clamping Mechanisms
Applies consistent 982 N clamping force at 0.5 MPa to secure aluminum extrusions during CNC machining operations.
Package Diverters
Pushes cartons off a main conveyor belt using a 195 mm stroke, fitting easily into compact sorter frames.
Vertical Lift Gates
Raises lightweight access gates on automated storage retrieval systems, safely lifting parts under 50 kg.
Is the Airtac SAU Standard Air Cylinder SAU50X195 the Right Cylinder?
When sizing this actuator, compare it against adjacent bores: the 40 mm version offers 628 N push at 0.5 MPa, while the 63 mm provides 1559 N, allowing you to match exact load margins. The 195 mm stroke falls well within the 1200 mm maximum standard stroke for this bore, requiring no special order. Since this model lacks the -S suffix, it has no magnet and cannot accept position sensors.
Keep in mind that a standard double-acting cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift, and the air cushion acts only to decelerate, not to brake. For suspended or vertical loads, incorporate an external rod lock or a pilot-operated check valve. Mounting hardware matches the AirTAC SC series, including LB foot, FA/FB flange, and CA/CB clevis options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAU Standard Air Cylinder SAU50X195 FAQ
The SAU50X195 has a 50 mm bore and 195 mm stroke. It delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa, a push force of 1374 N at 0.7 MPa, and a theoretical maximum force of 200 kgf at 1.0 MPa. It features a 1/4" port, an M16x1.5 rod thread, and operates at speeds between 30-800 mm/s.
No, the SAU is a profile-type cylinder that is shorter than an ISO 15552 unit, so it is not dimensionally interchangeable with ISO standards. However, it shares mounting accessories with the AirTAC SC series, allowing you to use LB foot, FA/FB flange, and CA/CB clevis brackets. Additionally, this SKU lacks a magnet, so it cannot accept magnetic position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAU Standard Air Cylinder SAU50X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.