Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10
The AirTAC Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 110mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke110 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10
The AirTAC SAUJ100X110-10 is a double-acting, single-rod profile cylinder with an external stop screw. You can shorten the extend stroke by up to 10 mm on-site, yielding a usable travel of 100-110 mm. The nominal 110 mm is the maximum. This bore delivers a push of 3927 N and pull of 3681 N at 0.5 MPa. The 1/2" port and M20x1.5 rod end handle substantial airflow and load capacity.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. For sizing, a safe working load is roughly 2356 N (about 60% of the 3927 N push at 0.5 MPa), and you can vertically lift around 200 kg with a 2:1 margin. This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. The 29 mm adjustable air cushions decelerate the piston near the end caps.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 Technical Specifications
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 Is Used
Press Fit Tuning
Allows precise 0-10 mm adjustment for seating bearings without over-traveling the 100 mm bore.
Carton Flap Folding
Fine-tunes the extend endpoint to accommodate varying box heights on a packaging line.
Stopper Positioning
Dial in the exact 100-110 mm stopping point for different product widths on a conveyor.
Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 the Right Cylinder?
If you need less force, the 80 mm bore offers a 2513 N push at 0.5 MPa; stepping up is not possible as 100 mm is the largest. This SAUJ is ideal when you need precise 100-110 mm end-position tuning without buying a custom cylinder. It beats a fixed SAU plus an external stop because the adjustment is integrated into the end cap. Mount using Basic, FA flange, or LB foot brackets, which share compatibility with the AirTAC SC series. Because this SKU has no -S magnet, you cannot mount magnetic sensors. For a 110 mm stroke, side-load is minimal, but always guide the load to prevent rod binding. Note that the stop screw sets the end position; it is not a load lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10 FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The nominal 110 mm extend stroke can be shortened by up to 10 mm via the external stop screw, giving a 100-110 mm usable window.
No. The stop screw only sets the end position, and the air cushion only decelerates the piston. The piston will drift on air loss or valve centering. For load holding, install an external rod lock or pilot-operated check valve. Also, this non-S SKU lacks a magnet and cannot take sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X110-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.