Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S
The AirTAC Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S
The AirTAC SAUJ32X30-10S is a double-acting single-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the 30 mm nominal stroke by up to 10 mm, giving a usable range of 20-30 mm. It features a 1/8" port and a built-in piston magnet for CMSG, DMSG or EMSG switches. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
In the 32 mm bore class, this unit delivers 402 N push and 345 N pull at 0.5 MPa, peaking at 82 kgf theoretical max at 1.0 MPa. Based on the 0.5 MPa push figure, the safe working load is roughly 241 N, translating to a vertical lift capacity of about 20 kg with a 2:1 safety margin. The adjustable cushion spans 21 mm, and a Viton H seal option can raise the standard -20 to +70 C temperature range up to 150 C.
Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S Technical Specifications
| Model | Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S Is Used
Pick-and-Place Refinement
Ideal for small grippers needing exact extend endpoint tuning to pick delicate components without crushing them.
Small Part Ejection
Provides adjustable ejection reach on a conveyor, letting operators dial in the 10 mm window for varied product sizes.
Light Clamping Fixtures
Used in low-force clamping where the 241 N safe working load secures parts while the stop screw sets the final clamp depth.
Is the Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S the Right Cylinder?
When sizing this 32 mm bore unit against neighbors, step up to a 40 mm cylinder if you need 628 N push at 0.5 MPa, or down if less force is required. Choose this SAUJ model over a fixed SAU when your assembly requires minor field adjustments to the extend end position without buying new hardware. It supports basic, FA and LB mounting, sharing compatibility only with the AirTAC SC series. The -S suffix ensures readiness for CMSG, DMSG or EMSG sensors. Because the 30 mm stroke is short, side-load guiding is less critical, but always guide the load for rigid attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S FAQ
This 32 mm bore cylinder provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, 724 N at 0.9 MPa, and an 82 kgf theoretical max at 1.0 MPa. The 30 mm nominal extend stroke can be shortened by up to 10 mm via an external stop screw, yielding a 20-30 mm usable range. It uses a 1/8" port.
The -S suffix means a piston magnet is built-in for direct mounting of CMSG, DMSG or EMSG sensors. A plain cylinder does not hold load on air loss; the piston drifts and the cushion only decelerates near stroke end. The stop screw sets end position but is not a load lock. For held loads, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUJ32 Adjustable Stroke Cylinder SAUJ32X30-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.