Airtac SC100 Standard Cylinder SC100X2000
The AirTAC Airtac SC100 Standard Cylinder SC100X2000 is a genuine double-acting standard air cylinder with a Ø100mm bore and 2000mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke2000 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X2000
The AirTAC SC100X2000 is a double-acting pneumatic cylinder engineered for applications demanding an exceptionally long 2000 mm stroke from a 100 mm bore. This model generates a substantial push force of 3927 N at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa, making it a powerful linear actuator for large-scale automation tasks.
With a 25 mm diameter piston rod and a 29 mm adjustable air cushion at each end, the SC100X2000 decelerates heavy loads smoothly, reducing end-of-stroke impact. The 2000 mm stroke exceeds the standard 1500 mm maximum for this bore, classifying it as a made-to-order, non-standard unit. Its tie-rod construction provides a robust, serviceable design, and the total extended body length reaches 2188 mm (188 mm body length A + 2000 mm stroke).
Airtac SC100 Standard Cylinder SC100X2000 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X2000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X2000
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X2000 Is Used
Long-Reach Material Pusher
Ideal for pushing heavy pallets or large components across a wide conveyor or roller bed in a warehouse distribution system, using its 2-meter stroke.
Large Panel Press Feed
Feeds oversized wooden panels or metal sheets into a stamping press or saw, where the long stroke clears the machine's safety zone completely.
Grain Silo Gate Actuator
Operates a large sliding gate at the bottom of a grain silo or hopper, providing the high force and long travel needed to control bulk material flow.
Is the Airtac SC100 Standard Cylinder SC100X2000 the Right Cylinder?
Selecting the SC100X2000 means committing to a high-force, long-stroke solution. If your application requires even more force, consider stepping up to the 125 mm bore, which delivers 6136 N of push force at 0.5 MPa. For a more compact design with lower force, the 80 mm bore provides 2513 N. At a 2000 mm stroke, rod buckling and side-load bending are critical design factors; an external guide system or a self-guided cylinder is strongly recommended to protect the rod bearing and seals from premature wear. For a direct replacement, match the 100 mm bore, 2000 mm stroke, PT port thread, and basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X2000 FAQ
At the standard 0.5 MPa operating pressure, the cylinder provides a push force of 3927 N and a pull force of 3681 N. The force increases linearly with pressure, reaching a maximum push force of 7068 N at 0.9 MPa.
A 2000 mm stroke on a 25 mm rod creates a high risk of buckling under compressive loads and bending from side forces. You must use an external linear guide rail system or mount the cylinder to drive a guided carriage to absorb all transverse loads, protecting the rod and internal bearings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X2000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.