Airtac SC32 Standard Cylinder SC32X225S
The AirTAC Airtac SC32 Standard Cylinder SC32X225S is a genuine double-acting standard air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke225 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SC32 Standard Cylinder SC32X225S
The SC32X225S is a compact double-acting tie-rod cylinder with a 32 mm bore and 225 mm stroke, delivering 402 N of push force at 0.5 MPa (724 N at the maximum operating pressure of 0.9 MPa). The 12 mm piston rod and 21 mm adjustable air cushion provide smooth deceleration for light automation tasks.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for reliable end-of-stroke detection. The total extended body length is approximately 365 mm, making it a space-efficient choice for compact machine designs.
Airtac SC32 Standard Cylinder SC32X225S Technical Specifications
| Model | Airtac SC32 Standard Cylinder SC32X225S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC32 Standard Cylinder SC32X225S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC32 Standard Cylinder SC32X225S Is Used
Small-Part Sorting Gates
The 225 mm stroke and 402 N push force reliably actuate diverter gates on compact conveyor lines, routing lightweight packages or components between lanes.
Pick-and-Place Z-Axis
With a built-in magnet for sensor feedback, this cylinder controls the vertical stroke on small pick-and-place heads, ensuring consistent part retrieval and placement.
Lab Automation Actuation
Delivers clean, oil-free actuation for test-tube elevators or lid openers in laboratory workcells, where the 724 N max force handles light payloads with precision.
Is the Airtac SC32 Standard Cylinder SC32X225S the Right Cylinder?
Choose the SC32 bore for light pushing, clamping, and sorting applications where the 402 N force at 0.5 MPa is sufficient. If your load requires more force, step up to the SC40 bore, which provides 628 N at the same pressure. For strokes of 225 mm on a 12 mm rod, ensure the load is guided and free of side forces; an external guide rail or rod-alignment coupler is recommended to prevent rod bending.
To replace an existing cylinder, match five points: 32 mm bore, 225 mm stroke, PT1/8 port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC32 Standard Cylinder SC32X225S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC32 Standard Cylinder SC32X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.