The AirTAC Airtac SC32 Standard Cylinder SC32X75FA is a genuine double-acting standard air cylinder with a Ø32mm bore and 75mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X75FA is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 32 mm bore with a 75 mm stroke. It delivers a push force of 402 N at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, making it suitable for light clamping and sorting tasks.
This model features an FA front rectangular flange (part F-SC32FA) for secure panel or bulkhead mounting. The 12 mm diameter piston rod with M10x1.25 thread provides adequate rigidity for the 75 mm stroke, while the adjustable air cushion, with a 21 mm cushion length, effectively decelerates the piston at end-of-stroke.
| Model | Airtac SC32 Standard Cylinder SC32X75FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 402 N push force at 0.5 MPa is ideal for diverting lightweight packages or components on a conveyor line, where the front flange allows direct mounting to the machine frame.
Provides consistent clamping force for holding small workpieces during drilling, gluing, or assembly operations, with the adjustable cushion protecting the fixture from impact.
A compact 32 mm bore actuator with a clean, tie-rod design suits fluid handling or test equipment automation where space is limited and a 75 mm linear stroke is required.
Select the SC32X75FA when your application requires a compact, front-flange mounted actuator with around 400 N of force at standard plant pressure. If your load calculation exceeds 500 N, consider stepping up to the SC40 bore, which provides 628 N of push force at the same 0.5 MPa pressure.
For replacement, ensure the new cylinder matches these five key points: 32 mm bore, 75 mm stroke, PT1/8 port thread, FA front flange mounting, and the standard non-magnetic piston. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
Quick checklist
At 0.5 MPa, the cylinder provides 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. Replace only with an identical AirTAC SC32 cylinder matching the bore, stroke, PT port, and FA front flange mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.