Airtac SC80 Standard Cylinder SC80X2000TC
The AirTAC Airtac SC80 Standard Cylinder SC80X2000TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 2000mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke2000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X2000TC
The AirTAC SC80X2000TC is a double-acting pneumatic cylinder with an 80 mm bore and an extended 2000 mm non-standard stroke, built for applications requiring long linear travel. This model delivers a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This specific configuration includes a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC80TC), allowing the cylinder to pivot during operation. With a body length A of 182 mm, the total extended length reaches 2182 mm. The adjustable air cushion at each end is 28 mm long, designed to decelerate the piston smoothly at the end of its travel.
Airtac SC80 Standard Cylinder SC80X2000TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X2000TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X2000TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X2000TC Is Used
Long-Reach Material Pusher
Uses the 2000 mm stroke to push pallets or heavy boxes across wide conveyor transfer stations, with the trunnion mount absorbing the angular movement of the pusher arm.
Grain Silo Slide Gate Actuator
Operates a large slide gate at the bottom of a silo, providing the long travel needed to fully open or close the chute while pivoting to align with the gate's arc path.
Automated Welding Positioner
Extends and retracts a welding fixture over a long distance. The centre trunnion mount allows the entire cylinder body to pivot as the fixture moves, preventing rod binding.
Is the Airtac SC80 Standard Cylinder SC80X2000TC the Right Cylinder?
Selecting the SC80X2000TC means specifying a non-standard stroke that exceeds the 1500 mm maximum standard length for the 80 mm bore. For applications needing less force, stepping down to the 63 mm bore provides 1559 N of push force at 0.5 MPa. If more force is required, the 100 mm bore offers 3927 N at the same pressure.
At a 2000 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads. An external guide system or a self-guided cylinder is strongly recommended to protect the rod bearings and seals from premature wear. When replacing this unit, match the 80 mm bore, 2000 mm stroke, PT port thread, TC centre trunnion mounting, and the absence of a magnet sensor option to ensure a direct fit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X2000TC FAQ
The theoretical push force is 2513 N at 0.5 MPa and 4523 N at 0.9 MPa. The pull force on the return stroke is 2268 N at 0.5 MPa, accounting for the area reduction from the 25 mm rod.
For any stroke of this length, side loading is a critical concern. You must use an external linear guide or rod support to carry the weight of the load and absorb any lateral forces. The cylinder's rod bearings are designed to manage axial thrust, not bending moments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X2000TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.